Aboglass™
- Chemical Family
- Epoxy & Epoxy Derivatives
Aboglass™ enhances the natural beauty of wood and gives it a deeper dimensional appearance. At the same time, it protects the wood from spills, contaminants and abrasion. It makes the difference between an average looking wooden surface and one that truly stands out. ABOGLASS contains no water or solvents.
Product families
Applications
- Consumer Goods — Furniture
- Wood Coatings & Finishes
- Marine Coatings
- Marine
Product Families
- Top Coats
Other characteristics
- Brand
- Aboglass
- Features
Abrasion Resistant, Excellent Aesthetics, Heat Resistance, High Clarity, High Gloss, High Impact Resistance, High Purity, High Solids Content, Water Resistant
- Product Type
Epoxy Coating, Solventless & High Solids Coating, Top Coat; Epoxy Coating; Solventless & High Solids Coating; Top Coat
- Application Area
- Furniture, Marine Applications
- Furniture
- Marine Applications
- Application Method
- Brush
- Compatible Substrates & Surfaces
- Wood
- Markets
- Automotive & Transportation
- Consumer Goods
- Paints & Coatings
- Application
Wood surface should be clean and free of dirt and dust.; Slowly mix together equal volumes of resin and hardener.; Pour or brush Aboglass onto surface. Use spreader or brush to cover entire surface.; If surface bubbles appear use heat gun, blow torch or needle to eliminate.; Allow coating to harden at least 1 hour at room temperature before moving, and 2 to 3 days before use.; Recoat, as desired, within 24 hours of hardening.; For maximum rigidity, heat cure, after hardening, for 1 hr. at 120°F.; Exceptional high-gloss and clarity; Enhances the natural beauty of wood; Pour layers up to 2 inches thick; High impact, water, abrasion, and heat resistance; Easy application
- Technology
- Ready-to-Use Products
- Labeling Claims
- Solvent-free
- Water-free
- Recommended
- Tables
- Bartops
- Boats
- Embedments
- Vanities
- Pictures.
- Application Methods
- Brush
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Abrasion Resistant
- Excellent Aesthetics
- Heat Resistance
- High Clarity
- High Gloss
- High Impact Resistance
- High Purity
- High Solids Content
- Compatible Substrates and Surfaces
- Wood
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Abrasion Resistance (Volume Loss) | 0.1116 | g |
| Flash Point A | min. 400 | °F |
| Flash Point B | min. 200 | °F |
| Hardening Time | approx. 45 - 55 | Minutes |
| Hardness | 77.0 | Shore D |
| Mix Ratio by Volume A:B | 1:1 | — |
| Pencil Scratch Hardness | HB | — |
| Viscosity | 1,500 - 2,000 | cps |
