Primkote 8006-1™
- Chemical Family
- Epoxy & Epoxy Derivatives
Primkote 8006-1 excels as a primer for concrete, metal and wood. It also performs well as a penetrating primer for weathered wood, concrete sealer, conditioner for urethanes, and tie-coat between epoxy surfaces.
Product families
Applications
- Concrete Coatings & Stains
- Wood Coatings & Finishes
Product Families
- Primers & Sealers
Other characteristics
- Brand
- Primkote 8006-1
- Features
Fast Drying, Flexible, Good Weather Stability, High Capacity of Penetration, High Gloss, High Performance, Water Resistant
- Product Type
2K (2 component) Coating, Epoxy Coating, Primer, Sealer, Solventborne Coating; 2K (2 component) Coating; Epoxy Coating; Primer; Sealer; Solventborne Coating
- Application Method
- Brush, Gun, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal, Wood
- Color
- Transparent
- Carrier
- Solvent-based
- Markets
- Paints & Coatings
- Pot Life
- 3 - 4 Days
- Shelf LIfe
- 2 years
- Application
Good surface preparation is essential for strong adhesion. Clean surface by washing, sandblasting, or muriatic acid etching as appropriate for the substrate. Existing coatings can be primed only if brushing with Primkote 8006-1 shows adhesion without peeling or lifting.; Mix equal volumes of resin (Part A) and hardener (Part B) by stirring in a container. Wait 45 minutes or longer after mixing before applying. Apply with spraygun, brush or roller. Highly absorbent surfaces may require more than one coat of primer. Wait at least 1 hour and no longer than 4 days to apply top coat. Sand or reprime primer coat before applying top coat if primer has been applied more than 3-4 days.; Easily applied by brushing, rolling or spraying. Covers 320 sq. ft. 1 mil per gallon.
- Availability
Primkote 8006-1 is available in 2 quart, 2 gallon and 10 gal Ion kits.
- Technology
- Ready-to-Use Products
- Application Methods
- Brush
- Gun
- Roller
- Spray
- Benefits and Features
- Features:
- 2-component (1:1 ratio)
- Solvent-based
- Flexible
- Fast-drying
- Glossy
- Benefits:
- Can be used on both dry and damp surfaces
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Fast Drying
- Flexible
- Good Weather Stability
- High Capacity of Penetration
- High Gloss
- High Performance
- Water Resistant
- Compatible Substrates and Surfaces
- Concrete
- Metal
- Wood
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Application Temperature | 60 - 80 | °F | — |
| Hardening Time | 2.0 | Hours | — |
| Heat Resistance | 212.0 | °F | ASTM D2485 |
| Impact Resistance | 68.0 | — | ASTM D4226 |
| Pull-off Strength | 943.0 | psi | ASTM 4541 |
| Solids by Weight | 25.0 | % | — |
| Tack-free Time | 10.0 | Minutes | — |
| Viscosity | 7.35 | cps | ASTM D 562 |
| VOC EPA | 240.0 | g/L | Method #24 |
