To catalogue
Accura® HPC
Product families
Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
- Other Automotive Applications
- Powertrain & UTH
Industrial — Chemical & Industrial Manufacturing
- Tooling & Moldmaking
Automotive & Transportation — Transportation
- Aerospace & Aviation
Electrical & Electronics — Wire & Cable
- Jacketing & Insulation
Product Families
Plastics — 3D Printing Polymers
- Photoactive Resins
Other characteristics
- Brand
- Accura
- End Uses
Aerospace Applications, Automotive Applications, Automotive Exterior Parts, Automotive Interior Parts, Automotive Under The Hood, Electronic Insulation, Tooling
- Tensile Strength
- 66.0 - 89.0 MPa
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Material Features
- Good Surface Finish
- Heat Resistance
- High Rigidity
- Low Viscosity
- Plastics and Elastomers End Uses
- Aerospace Applications
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Automotive Under The Hood
- Electronic Insulation
- Tooling
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 4
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 66 - 89 | MPa | ASTM D638 |
| Hardness | 80 | Shore D | ASTM D2240 |
| Elongation at Break | 0.8 - 1.9.0 | % | ASTM D638 |
| Tensile Modulus | 9000 - 9700 | Mpa | ASTM D638 |
| Flexural Strength | 137 - 157 | MPa | ASTM D790 |
| Flexural Modulus | 8700 - 10200 | Mpa | ASTM D790 |
| Notched Izod Impact Strength | 14 - 17 | J/m | ASTM D256 |
| Poissons Ratio | ~0.32 | — | ASTM D638 |
| Penetration Depth (Dp) | 5 | mils | -- |
| Critical Exposure (Ec) | 5.9 | mJ/cm2 | -- |
Table 2 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solid Density | 1.61 | g/cm³ | ASTM D150 |
| Viscosity (30°C) | 700 - 1000 | cps | -- |
| Liquid Density | 1.6 | g/cm3 | -- |
Table 3 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Thermal Expansion (50-100°C) | 64.2 | ppm/°K | ASTM E 831-93 |
| Coefficient of Thermal Expansion (100-150°C) | 81.7 | ppm/°K | ASTM E 831-93 |
| Heat Deflection Temperature - HDT (UV Postcure only, 66psi) | 73 | °C | ASTM D648 |
| Heat Deflection Temperature - HDT (UV Postcure only, 264 psi) | 62 | °C | ASTM D648 |
| Heat Deflection Temperature - HDT (UV + Thermal Postcure (120°C), 66 psi) | 250 | °C | ASTM D648 |
| Heat Deflection Temperature - HDT (UV + Thermal Postcure (120°C), 264 psi) | 87 | °C | ASTM D648 |
Table 4 of 4
1 row| Characteristic | Value | Method |
|---|---|---|
| Dielectric Constant (1 MHz) | 4.2 | ASTM D 150 |
