To catalogue
DuraForm® ProX HST Composite
Properties
- Physical Form
- Powder
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics; Consumer Goods — Other Consumer Goods Applications; Consumer Goods — Sports & Recreation
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
- Other Automotive Applications
- Powertrain & UTH
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
Automotive & Transportation — Transportation
- Aerospace & Aviation
Product Families
Plastics — 3D Printing Polymers
- Thermoplastic Powder
Other characteristics
- Brand
- DuraForm
- End Uses
Aircraft Applications, Automotive Applications, Automotive Exterior Parts, Automotive Interior Parts, Automotive Under The Hood, Computer Components, Consumer Applications, Sporting Goods
- Features
- Heat Resistance, High Stiffness
- Tensile Strength
- 44.0 - 44.0 MPa
- Processing Methods
- Selective Laser Sintering
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Appearance
- Clear or transparent
- Technology
- Plastics
- Fillers Included
- Mineral
- Material Features
- Heat Resistance
- High Stiffness
- Plastics and Elastomers End Uses
- Aircraft Applications
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Automotive Under The Hood
- Computer Components
- Consumer Applications
- Sporting Goods
- Plastics and Elastomers Processing Methods
- Selective Laser Sintering
Technical data
Table 1 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Sintered Part Density - Internal | 1.12 | g/cm3 | -- |
Table 2 of 4
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Ultimate Tensile Strength | 44 | MPa | ASTM D638 |
| Hardness | 73 | Shore D | ASTM D2240 |
| Elongation at Break | 4.3 | % | ASTM D 638 |
| Tensile Modulus | 4123 | MPa | ASTM D638 |
| Ultimate Flexural Strength | 75 | MPa | ASTM D790 |
| Flexural Modulus | 3430 | MPa | ASTM D 790 |
| Notched Izod Impact Strength (23°C, 0.12) | 55 | J/m | ASTM D256 |
| Unnotched Izod Impact Strength (23°C, 0.12) | 307 | J/m | ASTM D256 |
Table 3 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Thermal Expansion (0-50°C) | 153.4 | µm/m°C | ASTM E831 |
| Coefficient of Thermal Expansion (85-145°C) | 330.4 | µm/m°C | ASTM E831 |
| Heat Deflection Temperature - HDT (0.45 MPa) | 183 | °C | ASTM D648 |
| Heat Deflection Temperature - HDT (1.82 MPa) | 171 | °C | ASTM D648 |
| Thermal Conductivity | 0.29 | W/(m K) | DIN 52616 |
Table 4 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dissipation Factor (1 kHz) | 0.049 | — | ASTM D150 |
| Surface Resistivity | 1.53e+15 | ohm/sq | ASTM D257 |
| Dielectric Constant (1 kHz) | 2.95 | — | ASTM D150 |
| Volume Resistivity | 1.53e+15 | ohm-cm | ASTM D257 |
| Dielectric Strength | 16.5 | kV/mm | ASTM D149 |
