Ketoprix™ EKT33G3P2
- CAS Number
- 88995-51-1
- Chemical Family
- Aliphatics
Ketoprix™ EKT33G3P2 resins are thermoplastic aliphatic polyketone compounds where the polyketone base polymer consists Of perfectly alternating a-olefins and CO to give the 1,4-dketone polymer backbone structure. TO this base resin, fiber reinforcement. additional thermal stabilizers and high wear-resistant lubricants are added to achieve desired mechanical performance.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Consumer Goods — Appliances & Electronics; Automotive & Transportation — Other Automotive & Transportation Applications; Consumer Goods — Other Consumer Goods Applications; Electrical & Electronics — Other Electrical & Electronics Applications; Industrial — Other Industrial Applications
- Fuel Systems
- Other Automotive Applications
- Powertrain & UTH
- Pipes & Plumbing
- Other Industrial Applications
- Other Parts & Components
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- Ketoprix
- Polymer Name
- Polyketone
- Fillers Included
- Natural Fiber
- Flexural Modulus
- 7500.0 - 7500.0 MPa
- Additives Included
- Other Included Additives
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Regulatory
Ketoprix™ Polyketone resins comply with all regulatory statues in the USA.
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Consistent High Quality
- Excellent Stiffness
- Excellent Strength
- Excellent Toughness
- Good Thermal Stability
- High Performance
- High Resilience
- Chemical Inventories
- TSCA (USA)
- Product Characteristic
These compounded resins are formulated for Injection Molded parts where higher strength and stiffness combined With high wear resistance and surface friction are required Ketoprix™ EKT33G3P2 compounds are typically used in E&E, Automotive. Consumer, Appliance and Industrial End Uses.. Ketoprix™ Polyketone fiber reinforced, high wear-resistance compounds are processable in conventional Injection Molding (1M) equipment. More information 1M operation Of Ketoprix™ Polyketone resins is contahed in our KETOPRIXT•M Iniection Molding Guide. The key to processing Ketoprix™ Polyketones is to minimize holdup and residence time as much as possible.
- Certifications and Compliance
- UL 94
- Environmental, Health & Safety
Ketoprix™ Polyketone resins are not hazardous. For information on handling and storage of Ketoprix™ Polyketone resins, please consult our Safety Data Sheets, available from Esprix Technologies.
- Plastics and Elastomers End Uses
- Appliance Components
- Appliances
- Automotive Applications
- Automotive Fuel Lines
- Bearings
- Bushings
- Electrical Components
- Gears
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.4 | g/cm3 | ASTM D792 |
| Flexural Modulus at 23°C | 7.5 | GPa | ASTM D790 |
| Flexural Strength at 23°C | 200 | MPa | ASTM D790 |
| Melting Temperature | 220 | °C | ASTM D1525 |
| Mold Shrinkage (Flow Direction) | 1 | % | ASTM D955 |
| Nominal Strain at Break | 6 | % | ASTM D638 |
| Tensile Modulus at 23°C | 8.2 | GPa | ASTM D638 |
| Tensile Strength at 23°C | 200 | MPa | ASTM D638 |
| Viscosity at 280°C | 100-300 | Pa-s | — |
