Ketoprix™ EKT33G3L
- CAS Number
- 88995-51-1
- Chemical Family
- Aliphatics
Ketoprix™ EKT33G3L are thermoplastic aliphatic polyketone compounds where the polyketone base polymer consists of perfectly alternating α-olefins and CO to give the 1,4-diketone polymer backbone structure. To this base resin, fiber reinforcement, additional thermal stabilizers and lubricants are added to achieve desired mechanical performance and to assist in injection molding.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Automotive & Transportation — Other Automotive & Transportation Applications; Electrical & Electronics — Other Electrical & Electronics Applications; Industrial — Other Industrial Applications
- Fuel Systems
- Other Automotive Applications
- Powertrain & UTH
- Pipes & Plumbing
- Other Industrial Applications
- Other Parts & Components
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- Ketoprix
- Polymer Name
- Polyketone
- Fillers Included
- Natural Fiber
- Additives Included
- Other Included Additives
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Building & Construction
- Electrical & Electronics
- Industrial
- Processing
Ketoprix™ Polyketone fiber reinforced compounds are processable in conventional Injection Molding (IM) equipment. More information about IM operation of Ketoprix™ Polyketone resins is contained in our Ketoprix™ Injection Molding Guide. The key to processing Ketoprix™ Polyketones is to minimize holdup and residence time as much as possible.
- Regulatory
Ketoprix™ Polyketone resins comply with all regulatory statues in the USA.
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Consistent High Quality
- Excellent Stiffness
- Excellent Strength
- Excellent Toughness
- Good Thermal Stability
- High Performance
- High Resilience
- Chemical Inventories
- TSCA (USA)
- Product Characteristic
These compounded resins are formulated for Injection Molded parts where higher strength and stiffness are required. Ketoprix™ EKT23G3C2/3 compounds are typically used in E&E, Automotive and Industrial End Uses.
- Certifications and Compliance
- UL 94
- Environmental, Health & Safety
Ketoprix™ Polyketone resins are not hazardous. For information on handling and storage of Ketoprix™ Polyketone resins, please consult our Safety Data Sheets, available from Esprix Technologies.
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Fuel Lines
- Bearings
- Bushings
- Electrical Components
- Gears
- Industrial Applications
- Pipes
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.4-1.6 | g/cm3 | ASTM D792 |
| Flexural Modulus at 120°C | 5.0-8.0 | GPa | ASTM D790 |
| Flexural Strength at 120°C | 150-200 | MPa | ASTM D790 |
| Melting Temperature | 220 | °C | ASTM D1525 |
| Mold Shrinkage (Flow Direction) | ~1.0 | % | ASTM D955 |
| Nominal Strain at Break | 5.0-8.0 | % | ASTM D638 |
| Tensile Modulus at 120°C | 5.0-9.0 | GPa | ASTM D638 |
| Tensile Strength at 23°C | 90-130 | MPa | ASTM D638 |
| Viscosity at 280°C | 100-300 | Pa-s | — |
