Original Material "S" ® plus+ LF ESD [FS]
- Chemical Family
- PolyethylenesPolyolefins
Original Material "S" ® plus+ LF ESD [FS] is electrically conductive, enabling voltage to be dissipated at maximum speed with the same maximum friction resistance. A member of the S plus family Production based on PE-UHMW SG 1.1.The use of this plastic saves energy and improves the efficiency of your machines thanks to its low friction resistance. The sliding friction coefficient is reduced by up to 50 percent with this material – and so too the energy consumption for the drive power required. This plastic offers real energy-saving potential.
Product families
Applications
- Industrial — Other Industrial Applications
- Equipment & Parts
Product Families
- Polyolefins
Other characteristics
- Brand
- Original Material "S"
- Polymer Name
Ultra High Molecular Weight Polyethylene (UHMWPE)
- Markets
- Industrial
- Capability
As a solid sliding base in the semi-conductor industry For modular chain and conveyor belts Guides for PET bottle conveyors As workpiece carriers for sensitive electronic components Guides and slide elements for machine construction
- Technology
- Plastics
- Characteristics
Elektrisch leitfähig; Good slide properties; For use in explosion hazard areas; Extremely high conductivity; Voltage dissipation on the surface in less than 0.1s; Reduction in drive power with no reduction in performance; Saves up to 50% energy $$ Minimal and constant sliding friction coefficient even in continuous operation; Self-lubricating $$ Approved for use in the food industry (EU and/or FDA)
- Material Features
- Conductive
- Low Energy Consumption
- Self Lubricating
- Certifications and Compliance
- EU Compliant
- FDA Compliant
- Plastics and Elastomers End Uses
- Pump Parts
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 4
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Average Coefficient of Friction against POM⁶ (0.25 m/s, 0.25 N/mm²) | approx. 0.18 | μ | — |
| Average Coefficient of Friction against Steel⁶ (0.25 m/s, 0.25 N/mm²) | approx. 0.1 | μ | — |
| Breaking Elongation | min. 220 | % | DIN EN ISO 5272 |
| Charpy Impact Strength (Two-sided Notch) | min. 120 | kJ/m² | DIN EN ISO 179 |
| Coefficient of Elasticity (Tensile Test) | min. 700 | MPa | DIN EN ISO 5272 |
| Hardness | 60 - 63 | Shore D | DIN EN ISO 868 |
| Indentation Hardness | min. 25 | MPa | DIN EN ISO 2039 |
| Sand-Slurry Test | 80 | % | DIN EN ISO 15527 |
| Yield Stress | approx. 20 | MPa | DIN EN ISO 5272 |
Table 2 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Code | PE - UHMW | — | ISO 10431 |
| Average Molecular Weight | 9 x 10⁶ | g/mol | — |
| Density | max. 0.94 | kg/dm³ | DIN EN ISO 11831 |
| Material Colour | Black | — | — |
| Sheet Group | 1.1 | — | DIN EN ISO 15527 |
| Water Absorption (Saturation at 23°C) | max. 0.01 | % | — |
Table 3 of 4
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Burning behavior UL 94 (Sample thickness 3/6mm) | HB/HB | — | — |
| Heat Conductivity (23°C) | 0.4 | W/(K x m) | DIN 52612 |
| Linear Thermal Coefficient of Expansion α (Average Value between 23 and 60°C) | 20 x 10⁻⁵ | m/(K x m) | DIN EN ISO 113592 |
| Lower Service Temperature⁴ | -200 | °C | — |
| Melting Temperature | 130 - 135 | °C | DIN EN ISO 3146 |
| Upper Service Temperature Constant in Air (5000h)³ | 80 | °C | — |
| Upper Service Temperature Short-term (Air)² | 90 | °C | — |
Table 4 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Surface Resistance | max. 10⁶ | Ω | IEC 60093 |
| Specific Contact Resistance | max. 10⁻⁶ | Ω x cm | IEC 60093 |
