To catalogue
Addilene® PMD 50213
- Chemical Family
- PolyolefinsPolypropylenes (PP)
Copolymer PP, mineral filled, UV stabilized for interior automotive. For SDS, please contact Addiplast Group using the 'Request Document' button.
Product families
Applications
Applications
- Automotive & Transportation — Other Automotive & Transportation Applications
Automotive & Transportation — Automotive
- Interior
Product Families
Plastics — Basic Thermoplastics
- Polyolefins
Other characteristics
- Brand
- Addilene
- Polymer Name
- Polypropylene Copolymer
- Fillers Included
- Mineral
- Note
The LOI measures are obtained through standard specimens of type I, with ignition of type A.. The values indicated above have been realized with standard specimens which are conditionned according to ISO 291. These datas must be considered as indicative values, but in no case as minimum values. Moreover, the design of the mold/die, the processing conditions and the color may have an impact on the properties.
- Markets
- Automotive & Transportation
- Technology
- Plastics
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Instrument Panel
- Automotive Interior Parts
- Consoles
- Door Panel
- Instrument Panel
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 5
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Charpy Notched Impact Strength (at 23°C) | 6 | kJ/m2 | ISO 179-1/1eA |
| Hardness | 68 | Shore D | ISO 868 |
| Charpy Unnotched Impact Strength (at 23°C) | 57 | kJ/m2 | ISO 179-1/1eU |
| Elongation at Break | 20 | % | ISO 527-2/1A |
| Flexural Modulus | 2100 | MPa | ISO 178 |
| Izod Notched Impact Strength | 5.5 | kJ/m2 | ISO 180/1A |
| Stress at Break | 20 | MPa | ISO 527-2/1A |
| Stress at Yield Point | 23 | MPa | ISO 527-2/1A |
Table 2 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature | 59 | °C | ISO 75-2/Af |
| Melting Point | 165/168 | °C | ISO 11357-3 |
| Vicat Softening Point | 146 | °C | ISO 306/A50 |
Table 3 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| CTI | min. 600 | V | CEI 60112 |
Table 4 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.04 | g/cm3 | ISO 1183-1 |
| MVI (at 230°C-2.16Kg) | 20 | cm3/10min | ISO 1133-1 |
Table 5 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Falling Ball Test | 127 | °C | CEI 60695-10-2 |
| Incandescent Glow Wire Flammability Test (at 2mm) | 750 / 5 | °C /s | CEI 60695-2-12 |
