To catalogue
Additer® STL 10002
- Chemical Family
- Polyesters
Product families
Plastics — Engineering & Specialty Polymers
- Polyesters & Copolyesters
Other characteristics
- Brand
- Additer
- Polymer Name
- Polybutylene Terephthalate (PBT)
- Note
The LOI measures are obtained through standard specimens of type I, with ignition of type A.. The values indicated above have been realized with standard specimens which are conditionned according to ISO 291. These datas must be considered as indicative values, but in no case as minimum values. Moreover, the design of the mold/die, the processing conditions and the color may have an impact on the properties.
- Markets
- Electrical & Electronics
- Applications
Electrical & Electronics — Other Electrical & Electronics Applications
- Technology
- Plastics
- Plastics and Elastomers End Uses
- Electrical/Electronic Applications
Technical data
Table 1 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 3 | kJ/m2 | ISO 179-1/1eA |
| Hardness | 81 | Shore D | ISO 868 |
| Charpy Unnotched Impact Strength | NB | kJ/m2 | ISO 179-1/1eU |
| Elongation at Break | 25 | % | ISO 527-2/1A |
| Flexural Modulus | 2400 | MPa | ISO 178 |
| Stress at Yield Point | 54 | MPa | ISO 527-2/1A |
Table 2 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Point | 225 | °C | ISO 11357-3 |
Table 3 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.31 | g/cm3 | ISO 1183-1 |
| MVI (at 250°C-2.16Kg) | 40 | cm3/10min | ISO 1133-1 |
Table 4 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Falling Ball Test | min. 125 | °C | CEI 60695-10-2 |
