To catalogue
Addinyl® C2
- Chemical Family
- Polyamides
Product families
Applications
Automotive & Transportation — Automotive
- Interior
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- Addinyl
- Polymer Name
- Polyamide 6/66 (PA 6/66)
- Note
- dam
- specimens 48h after molding
- cond
- specimens conditioned according to ISO 291 et ISO 1110.
- Markets
- Automotive & Transportation
- Technology
- Plastics
- Plastics and Elastomers End Uses
- Automotive Interior Trim
Technical data
Table 1 of 6
20 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Charpy Notched Impact Strength (cond) | 15 | kJ/m2 | ISO 179-1/1eA |
| Hardness | 83 / 76 | Shore D | ISO 7619-1 |
| Hardness (Cond) | 76 | Shore D | ISO 868 |
| Charpy Notched Impact Strength (dam) | 5 | kJ/m2 | ISO 179-1/1eA |
| Strain at Break | 40 / min. 50 | % | ISO 527 |
| Hardness (Dam) | 83 | Shore D | ISO 868 |
| Charpy Unnotched Impact Strength (cond) | NB | kJ/m2 | ISO 179-1/1eU |
| Yield stress | 85 / 50 | MPa | ISO 527 |
| Charpy Unnotched Impact Strength (dam) | NB | kJ/m2 | ISO 179-1/1eU |
| Flexural modulus, 23° | 2800 / 1000 | MPa | ISO 178 |
| Elongation at Break (cond) | min. 50 | % | ISO 527-2/1A |
| Elongation at Break (dam) | 40 | % | ISO 527-2/1A |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1140 / - | kg/m3 | ISO 1183 |
Table 3 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Temperature of deflection under load (1.80 Mpa) | 65 / * | °C | ISO 75-1/-2 |
| Melting temperature (10°C/min) | 243 / * | °C | ISO 11357-1/-3 |
| Heat Deflection Temperature | 65 | °C | ISO 75-2/Af |
| Melting Point | 243 | °C | ISO 11357-3 |
Table 4 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| CTI | min. 600 | V | CEI 60112 |
Table 5 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.14 | g/cm3 | ISO 1183-1 |
Table 6 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Incandescent Glow Wire Flammability Test (2mm) | 750 | °C | CEI 60695-2-12 |
| Limit Oxygen Index | 23.2 | % | ISO 4589-2 |
