MAVEN MS 105
- Chemical Family
- Polyesters
Selenis Maven MS 105 is a copolyester with a slow crystallization rate and is suitable for the extrusion of heavy gage sheets, allowing for thicknesses up to 2 mm, without crystallization occurring. Selenis Maven MS 105 is the most economic solution for flat sheets up to this thickness range, when good clarity, surface gloss, and neutral edge color are required.
Product families
- Thermoplastic Polyester Elastomers (TPE-E)
Other characteristics
- Brand
- MAVEN
- End Uses
Ceiling Panels, Decorative Displays, Displays, Door Panel, Instrument Panel, Wall Panels
- Polymer Name
- Copolyester Elastomer (COPE)
- Processing Methods
- Extrusion
- Markets
- Automotive & Transportation
- Building & Construction
- Electrical & Electronics
- Paints & Coatings
- Features
Selenis Maven MS 105 is recommended when a combination of decorative capability, enhanced graphics, good impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents, are essential.. Selenis Maven MS 105 is easy to process on standard extrusion lines. Sheets made with Selenis Maven MS 105 may be personalized though different methods of decoration, due to its inherent surface tension. Selenis Maven MS 105 is BPA and styrene free and is fully recyclable code 1.
- Technology
- Elastomers
- Labeling Claims
- Bisphenol A-free
- Recyclable
- Material Features
- Chemical Resistant
- Glossy Surface Aspects
- High Clarity
- Impact Resistance
- Recyclable
- Certifications and Compliance
- REACH (Europe)
- Plastics and Elastomers End Uses
- Ceiling Panels
- Decorative Displays
- Displays
- Door Panel
- Instrument Panel
- Wall Panels
- Safety Consideration
Read and follow all information presented in the Safety Data Sheet (SDS) for this product.
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Intrinsic Viscosity | 0.84 - 0.88 | dl/g | ISO 1628-5 |
| Color b* | max. 0 | — | ASTM D6290 |
| Color L* | min. 85 | — | ASTM D6290 |
| Acetaldehyde | max. 1 | ppm | ASTM F2013 |
| Melting Point | 235 - 245 | °C | ASTM D3418 |
| Crystallinity | min. 48 | % | ASTM D1505 |
| Specific Density Crystalline | min. 1.39 | g/cm3 | — |
| Bulk Density | 0.84 | g/cm3 | — |
| Moisture | max. 0.2 | % | — |
| Particle size | 270 - 370 | mg/20 chips | — |
| Pellet Shape | Cylindrical | — | — |
| Food Approval Pharmacopeia | YES | — | — |
