VESTAMID® eCO LX9039 BBM100
- Chemical Family
- Polyamides
VESTAMID® eCO LX9039 BBM100 is a unique polyamide 12 product offered by Evonik. It is an unmodified polyamide 12 with medium viscosity and does not contain any stabilizers or processing aids. This specific formulation is typically utilized in special circumstances where the absence of additives is desired or the presence of processing aids could cause interference. The "eCO" in its name reflects Evonik's commitment to reducing CO2 emissions by utilizing renewable or circular feedstocks through a mass-balance approach. VESTAMID® eCO LX9039 BBM100 provides a reliable solution for applications requiring a pure polyamide 12 material without any additional additives, catering to specific requirements in various industries.
Properties
- Physical Form
- Granules
- Pellets
- Solid
Product families
Applications
- Consumer Goods — Sports & Recreation
- Cooling & Climate
- Equipment & Parts
- Batteries
- Connectors
- Jacketing & Insulation
Product Families
- Polyamides
Other characteristics
- Brand
- VESTAMID
- Polymer Name
- Polyamide 12 (PA 12)
- Flexural Modulus
- 1,412.45 MPa
- Color (Properties)
- Natural
- Materials Features
- Medium Viscosity, Unreinforced
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Industrial
- Shelf LIfe
- 2 years
- Flame Rating
- IEC 60695-11-10 HB
- Technology
- Plastics
- Labeling Claims
- Low Carbon Footprint (PCF)
- Sustainable
- Color
- Natural
- Material Features
- Medium Viscosity
- Unreinforced
- Storage Condition
Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.
- Packaging Information
VESTAMID® eCO LX9039 BBM100 is supplied as spherical granules, ready for processing in moisture-proof packaging.
- Plastics and Elastomers End Uses
- Cable Insulation
- Connectors
- EV Battery Coolant Pipes
- EV Battery Management System
- Industrial Applications
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 6
27 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (dry) | 203000 | psi | ISO 527 |
| Tensile Modulus (cond.) | 145000 | psi | ISO 527 |
| Tensile Strength (dry) | 6240 | psi | ISO 527 |
| Tensile Strength (cond.) | 5510 | psi | ISO 527 |
| Yield Stress (dry) | 6240 | psi | ISO 527 |
| Yield Stress (cond.) | 5510 | psi | ISO 527 |
| Yield Strain (dry) | 5 | % | ISO 527 |
| Yield Strain (cond.) | 15 | % | ISO 527 |
| Stress at 50% Strain (dry) | 4640 | psi | ISO 527 |
| Stress at 50% Strain (cond.) | 4500 | psi | ISO 527 |
| Stress at Break (dry) | 7250 | psi | ISO 527 |
| Stress at Break (cond.) | 7250 | psi | ISO 527 |
Table 2 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (dry) | 1.02 | g/cm³ | ISO 1183 |
| Water Absorption (dry) | 1.5 | % | Sim. to ISO 62 |
| Humidity Absorption (dry) | 0.7 | % | Sim. to ISO 62 |
| Shore D Hardness (dry) | 45 (3 sec) | — | ISO 7619-1 |
Table 3 of 6
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (dry) | 352 | °F | ISO 11357-1/-3 |
| Glass Transition Temperature (dry) | 102 | °F | ISO 11357-1/-2 |
| Temperature of Deflection Under Load A (1.80 Mpa, dry) | 122 | °F | ISO 75-1/-2 |
| Temperature of Deflection Under Load B (0.45 Mpa, dry) | 230 | °F | ISO 75-1/-2 |
| Vicat Softening Temperature A (10 N, 50 K/h, dry) | 343 | °F | ISO 306 |
| Vicat Softening Temperature B (50 N, 50 K/h, dry) | 280 | °F | ISO 306 |
| Coefficient of Linear Thermal Expansion (23°C to 55 °C, Parallel, dry) | 8.33e-05 | in/in/°F | ISO 11359-1/-2 |
Table 4 of 6
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity (pV, dry) | 0 | Ohm*m | IEC 62631-3-1 |
| Volume Resistivity (pV, cond.) | 2.2E12 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity (σC, Circular Electrodes, dry) | min. 1E15 | Ohm/sq | IEC 62631-3-2 |
| Surface Resistivity (σC, Circular Electrodes, cond.) | min. 1E15 | Ohm/sq | IEC 62631-3-2 |
| Relative Permittivity (50Hz, dry) | 3.9 | — | IEC 62631-2-1 |
| Relative Permittivity (100Hz, dry) | 3.8 | — | IEC 62631-2-1 |
| Relative Permittivity (1MHz, dry) | 3 | — | IEC 62631-2-1 |
| Dissipation Factor (100Hz, dry) | 500 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1Mhz, dry) | 323 | E-4 | IEC 62631-2-1 |
| Electric Strength (AC, S20/P50, dry) | 660 | V/mil | Sim. to IEC 60243-1 |
Table 5 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume Flow Rate (dry, at 464°F, 1lb) | 27 | cm³/10min | ISO 1133 |
| Molding Shrinkage (Parallel, dry) | 0.8 | % | ISO 294-4, 2577 |
| Molding Shrinkage (Normal, dry) | 1.1 | % | ISO 294-4, 2577 |
| Mold Temperature (dry) | 140 | °F | — |
| Melt Temperature (dry) | 428 | °F | — |
Table 6 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Burning Behavior (at 1.5 mm Nominal Thickness) (dry) | HB | class | IEC 60695-11-10 |
| Burning Behavior (at Thickness 0.1260 in.) (dry) | HB | class | IEC 60695-11-10 |
