VESTAMID® L1723 BK 9.7624
- Chemical Family
- Polyamides
VESTAMID® L1723 BK 9.7624 is a low-viscosity, plasticized PA12 resin suitable for injection molding. It has been developed specifically for the production of strip clips and cable ties. The parts made from this resin maintain their dimensions in environments with varying humidity levels while possessing high tenacity, a low coefficient of friction, and good chemical resistance.
Properties
- Physical Form
- Granules
- Pellets
- Solid
Product families
Applications
- Cooling & Climate
- Batteries
- Connectors
- Jacketing & Insulation
Product Families
- Polyamides
Other characteristics
- Brand
- VESTAMID
- Polymer Name
- Polyamide 12 (PA 12)
- Additives Included
Heat Stabilizer, Light Stabilizer, Lubricant (Unspecified), Plasticizer (Unspecified), Release agent, UV Stabilizer; Heat Stabilizer; Light Stabilizer; Lubricant (Unspecified); Plasticizer (Unspecified); Release agent; UV Stabilizer
- Materials Features
Chemical Resistant, Dimensional Stability, Good Tenacity, Good Weather Stability, Heat Stabilized, Light Stabilized, Low Coefficient of Friction, Low Viscosity, Low Water Absorption, Lubricated, Plasticized, Semi Crystalline, UV Stabilized
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Shelf LIfe
- 2 years
- Flame Rating
- IEC 60695-11-10 HB
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Dimensional Stability
- Good Tenacity
- Good Weather Stability
- Heat Stabilized
- Light Stabilized
- Low Coefficient of Friction
- Low Viscosity
- Storage Condition
Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.
- Packaging Information
VESTAMID® L1723 BK 9.7624 is supplied as cylindrical granules, ready for processing in moisture-proof packaging.
- Plastics and Elastomers End Uses
- Cable Insulation
- Cable Ties
- Connectors
- EV Battery Coolant Pipes
- EV Battery Management System
- Strip Clips
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (dry) | 525 | MPa | ISO 527-1/-2 |
| Tensile Modulus (cond.) | 450 | MPa | ISO 527-1/-2 |
| Yield Stress (dry) | 30 | MPa | ISO 527-1/-2 |
| Yield Stress (cond.) | 28 | MPa | ISO 527-1/-2 |
| Yield Strain (dry) | 27 | % | ISO 527-1/-2 |
| Yield Strain (cond.) | 26 | % | ISO 527-1/-2 |
| Nominal Strain at Break (dry) | min. 50 | % | ISO 527-1/-2 |
| Nominal Strain at Break (cond.) | min. 50 | % | ISO 527-1/-2 |
| Tensile Creep Modulus (1h, cond.) | 380 | MPa | 1S0 899-1 |
| Tensile Creep Modulus (1000h, cond.) | 290 | MPa | 1S0 899-1 |
| Charpy Notched Impact Strength (+23°C, dry) | 15C | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (+23°C, cond.) | 41C | kJ/m² | ISO 179/1eA |
Table 2 of 7
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min, dry) | 173 | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 Mpa, dry) | 45 | °C | 150 75-1/-2 |
| Temperature of Deflection Under Load (0.45 Mpa, dry) | 95 | °C | 150 75-1/-2 |
| Vicat Softening Temperature (50°C/h 50N, dry) | 130 | °C | ISO 306 |
| Coefficient of Linear Thermal Expansion (Parallel, dry) | 180 | E-6/K | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (Normal, dry) | 180 | E-6/K | 1SO 11359-1/-2 |
| Burning Behavior (at 1.5 mm Nominal Thickness) (dry) | HB | class | IEC 60695-11-10 |
| Burning Behavior (at Thickness 0.8 mm) (dry) | HB | class | IEC 60695-11-10 |
Table 3 of 7
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz, dry) | 10 | — | IEC 62631-2-1 |
| Relative Permittivity (100Hz, cond.) | 14 | — | IEC 62631-2-1 |
| Relative Permittivity (1MHz, dry) | 3.7 | — | IEC 62631-2-1 |
| Relative Permittivity (1MHz, cond.) | 4.3 | — | IEC 62631-2-1 |
| Dissipation Factor (100Hz, dry) | 1600 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (100Hz, cond.) | 1400 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1Mhz, dry) | 1200 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1Mhz, cond.) | 1700 | E-4 | IEC 62631-2-1 |
| Volume Resistivity (dry) | 1E10 | Ohm*m | IEC 62631-3-1 |
| Volume Resistivity (cond.) | 4E9 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity (cond.) | 2E13 | Ohm | IEC 62631-3-2 |
| Electric Strength (dry) | 33 | kv/mm | IEC 60243-1 |
Table 4 of 7
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Density of Melt | 860 | kg/m³ |
| Specific Heat Capacity Melt | 3000 | J/(kg-K) |
| Ejection Temperature | 170 | °C |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Humidity Absorption (dry) | 5 | % | Sim. to ISO 62 |
| Density (dry) | 1030 | kg/m³ | ISO 1183 |
| Density (cond.) | 1040 | kg/m³ | ISO 1183 |
Table 6 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Injection Molding - Melt Temperature | 200 | °C | 1S0O 294 |
| Injection Molding - Mold Temperature | 60 | °C | 1S0O 294 |
| Injection Molding - Injection Velocity | 200 | mm/s | 1S0O 294 |
| Injection Molding - Pressure at Hold | 70 | MPa | 1S0O 294 |
Table 7 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume Flow Rate (dry, at 230°C, 5kg) | 160 | cm³/10min | 1S0 1133 |
| Molding Shrinkage (Parallel, dry) | 16 | % | ISO 294-4, 2577 |
| Molding Shrinkage (Normal, dry) | 15 | % | 1S0 294-4, 2577 |
