Eurogrip 3000
Eurogrip 3000 is a high friction overlay designed to improve the frictional characteristics of a surface. A coat and scatter system, Eurogrip 3000 works by bonding high friction grit to concrete, bitmac, timber or metal using an adhesive slurry. This slurry is formulated from a polyurethane resin that adheres tenaciously to both grit and substrate.
Product families
- Protective Coatings
Other characteristics
- Brand
- Eurogrip
- Features
Anti-Slip, High Friction, Long Shelf Life, Oil Resistant, Provides Solvent Resistance, Skid Resistant
- Product Type
- Coating
- Compatible Substrates & Surfaces
- Asphalt, Concrete, Metal, Steel
- Usage
Highways, on hills, junctions, bends, roundabouts, before pedestrian crossings and level crossings, subways, traffic plates, etc.; Car parks, on ramps, aisles, bays and pedestrian access and decorations.; Footbridges, over roads, railways, rivers and canals.; Stair treads, railway platforms, airport baggage handling areas, engine sheds, ports, jetties and pontoons.
- Markets
- Automotive & Transportation
- Building & Construction
- Benefits
Reduced breaking distances, reducing the frequency of accidents; Long service life compared with other similar systems; Cold applied using mixer and squeegee; Low hazard materials; No need to remove road markings; Resistant to oils and solvents; Minimal maintenance; Minimal traffic disruption; Suitable for a wide range of substrates (bitumen, concrete, timber, steel, etc.); Low initial and whole life cost; Does not embrittle with age
- Cleaning
- Eurosolve should be used for cleaning tools, etc
- PACKAGING
Eurogrip 3000 is supplied in 23kg units and in 3 components.; Packaging is in 3 liter pots (pack A), 10 liter pots (pack B) and an 11kg bag.
- Technology
- Ready-to-Use Products
- Packaging Type
- Bags
