Beetall™ PD
- Chemical Family
- Phenyl-carbamates
160 g/L phenmedipham and 160 g/L desmedipham in the form of a suspo-emulsion Ethofumesate 500 g/litre 700 g/l metamitron 100 g/L phenmedipham and 300 g/L metamitron in the form of a suspension concentrate. For use in Fodder Beet.
Product families
- Herbicides
Other characteristics
- Brand
- Beetall
- Functions
- Herbicide
- HRAC/WSSA Group
- 5
- Formulation Type
- Suspoemulsions
- Application Technique
- Sprayers
- Herbicide Target Species
- Broadleafs
- Mixing
Add the required quantity of Beetall PD to the spray tank partly filled with water, and maintain agitation through filling and spraying.
- Markets
- Agriculture & Feed
- Rainfall
Do not spray if rainfall is expected before the spray has dried on foliage.
- Spillage
Exclude non-essential people from the area. Wear protective clothing and prevent material from entering waterways. Absorb spill with inert material such as soil, sand, etc, and place in a waste container. Wash area with water, and absorb with further inert material. Dispose of safely to a suitable landfill.
- Precaution
APPROVED HANDLER: This product must be under the control of an approved handler or secured. TRACKING: This product must be tracked – Refer to NZS 8409 Management of Agrichemicals. STORAGE: Keep out of reach of children. Store in the original, tightly closed container, in a secure place. Storage of certain quantities of this product trigger specific storage requirements (Refer to Safety Note). When stored appropriately this product should show no significant degradation for two years from the date of manufacture. Contact your supplier for further information about the use of product that is older than this. PERSONAL PROTECTION: Avoid contact with eyes and skin. Avoid inhalation of spray mist. When mixing or applying, wear overalls, boots, gloves and eye protection. Clean protective clothing daily after work. Do not eat, drink or smoke while using. Remove protective clothing and wash hands and face thoroughly before meals and after work. USE: Apply with well maintained and calibrated spray equipment. DISPOSAL: Dispose of this product only by using in accordance with this label, or at a suitable landfill. Dispose of packaging to a suitable landfill or via AgRecovery. Do not burn. Do not use packaging for any other purpose. ENVIRONMENTAL: Use this product carefully. Do not apply onto or into water. Do not contaminate aquatic environments with product, spray drift or empty container. Apply using ground based methods only. Spray drift or equipment contamination may cause serious damage to desirable plants. Do not allow spray drift outside the target area to occur.
- Technology
- Agrochemicals
- Compatibility
Do NOT mix Beetall PD with any foliar nutrients or surfactants.
- Packaging Type
- Cans
- Applicable Crop
- Beet
- Application Methods
Boom spraying: pply in 200 – 300 liters water/ha. Apply as a broadcast or band treatment. For band treatment, ensure that the use rate per ha is consistent with the label recommendation.
