CYGUARD™ LIQUID
800 g/kg flumetsulam in the form of a water dispersible granule. 2,4-D amine 720 g/litre Paraffinic oil and polyol fatty acid esters MCPB 375 g/litre + MCPA 25 g/litre A selective herbicide for control of certain broadleaf weeds in chicory, clover, lucerne, maize and pasture.
Properties
- Physical Form
- Liquid
Product families
Applications
- Ruminants
Product Families
- Other Health & Well-Being Products
Other characteristics
- Brand
- CYGUARD
- Mixing
Add the required quantity of Synergy Flumet 800 to the spray tank partly filled with water, and maintain agitation through filling and spraying. Add Synergy Mineral Oil or Synoil last if used. Only mix sufficient spray solution for immediate use. Do not store spray solutions.
- Markets
- Agriculture & Feed
- Spillage
Exclude non-essential people from the area. Wear protective clothing. Moisten to prevent dusting and sweep up. Place in a waste container. Dispose of safely to a suitable landfill.
- Precaution
APPROVED HANDLER: This product must be under the control of an approved handler during use. STORAGE: Keep out of reach of children. Store in the original, tightly closed container, in a secure place. Storage of certain quantities of this product trigger specific storage requirements (Refer to Safety Note). PERSONAL PROTECTION: Avoid contact with eyes and skin. Avoid inhalation of dust or spray mist. When mixing or applying, wear overalls, boots, gloves and eye protection. Clean protective clothing daily after work. Do not eat, drink or smoke while using. Remove protective clothing and wash hands and face thoroughly before meals and after work. USE: Apply with well maintained and calibrated spray equipment. DISPOSAL: Dispose of this product only by using in accordance with this label, or at a suitable landfill. Do not burn. Dispose of packaging to a suitable landfill. Do not burn. Do not use packaging for any other purpose. ENVIRONMENTAL: Use this product carefully. Do not contaminate aquatic environments with product, spray drift or packaging. Spray drift or equipment contamination may cause serious damage to desirable plants. Do not allow spray drift outside the target area to occur. Do not use or flush equipment near to desirable plants or their roots. Do not use the same equipment to apply other chemicals to susceptible crops unless thoroughly cleaned and decontaminated.
- Technology
- Animal Feed & Nutrition
- Compatibility
Synergy Flumet 800 is compatible with most commonly used herbicides. In pasture, the addition of Synergy MCPBMCPA or Tandem® will increase the range of broadleaf weeds controlled. If using with 2,4-D products such as Synergy 2,4-D Amine, Synergy 2,4-D Ester, Ammo® Max or Thistle Killem™ Ultra, use with a spray oil will increase clover damage and is not recommended unless the pasture has been well grazed prior to spraying. Do not mix Synergy Flumet 800 with spraying oil when using with triazine herbicides, eg, atrazine on lucerne.
- Soil Residues
Do not plant susceptible crops within 3 months of application. Susceptible crops include all brassica species, beans, lupins and sunflowers.
- Packaging Type
- Cans
- Application Methods
Synergy Flumet 800 can be applied with conventional spraying equipment: Boom and Aerial spraying: Apply in 100 – 300 liters water/ha. Use the higher water rate where weeds are dense. CDA application: Use a droplet size of 250 – 300 microns and not less than 30 liters of water per hectare. CDA application may be less effective than boom spraying. For CDA application, use 500 ml of spraying oil per hectare.
Technical data
Directions For Use
3 rows| Characteristic | Value | Unit |
|---|---|---|
| 30 | Chickweed, Spurrey, Wild Radish, Hedge Mustard | Apply before 4th leaf |
| 50 | Amaranthus (Redroot), Cleavers, Black Nightshade, Fathen, Shepherds Purse, Mallow Annual Buttercup, Creeping Yellow Cress, Yellow Gromwell | Apply before 4th leaf Apply before flowering |
| 65 | Larger weeds (above) Stinking Mayweed, Wireweed, Sorrel Field Pansy, Henbit, Willow Weed, Oxeye Daisy Giant Buttercup | Apply to young seedlings Apply to young seedlings (suppression only) Apply before flowering |
Directions For Use
6 rows| Characteristic | Value |
|---|---|
| New Pasture | Use after clover has developed 2 trifoliate leaves |
| New and Established White Clover Seed Crops | Apply after the emergence of the 4th trifoliate leaf and before stolon elongation |
| New and Established Red Clover Seed Crops and Subterranean Clover | Apply after the emergence of the 4th trifoliate leaf and before stolon elongation |
| Established Lucerne | Apply before flowering |
| Maize | Apply at the 4th leaf stage (90 mm plant height) |
| New and Established Chicory | Apply after the emergence of the 4th leaf |
