G Force ® Max

Other characteristics

Brand

G Force

Functions

Herbicide

HRAC/WSSA Group

9

Formulation Type

Concentrate Solutions

Application Technique

Sprayers

Herbicide Target Species

Broadleafs

Mixing

Fill the clean spray tank with half the required amount of clean water. Add GForce Max as required and mix well before adding the remaining water. If penetrant is required, add this last to minimize foaming. Agitate well before spraying. When tank-mixing with other chemicals, add GForce Max after suspension concentrates, such as Simatop ™ 500FW (simazine), and other water-soluble concentrates. Soil particles and hard water containing calcium salts deactivate GForce Max. If hard water cannot be avoided, the addition of a pH Buffer is recommended.

Show in full

Markets

Agriculture & Feed

Spillage

Exclude non-essential people from the area. Wear protective clothing and prevent material from entering waterways. Absorb spill with inert material such as soil, sand, etc, and place in waste container. Wash area with water, and absorb with further inert material. Dispose of safely to a suitable landfill.

Precaution

APPROVED HANDLER: This product must be under the control of an approved handler if applied onto or into water (otherwise not required). STORAGE: Keep out of reach of children. Store in the original, tightly closed container, in a secure place away from feed or foodstuffs. Avoid temperatures below -5°C and above 35°C. Storage of certain quantities of this product trigger specific storage requirements (Refer to Safety Note). When stored appropriately this product should show no significant degradation for two years from the date of manufacture. Contact your supplier for further information about the use of product that is older than this. PERSONAL PROTECTION: Avoid contact with eyes and skin. Avoid inhalation of spray mist. When mixing or applying, wear overalls, boots, gloves and eye protection. Clean protective equipment daily after work. Do not eat, drink or smoke while using. Remove protective clothing and wash hands and face thoroughly before meals and after work. USE: Apply with well maintained and calibrated spray equipment. This product should only be mixed, contained in or sprayed by, equipment made from stainless steel, fiberglass, plastic, aluminum, brass or copper. A highly flammable gas may be formed from the contact of this product with galvanized or unlined steel. All spray equipment, including pumps, spray tanks, lines, nozzles, and landing gear (aircraft) should be thoroughly washed with water after each day of spraying. DISPOSAL: Dispose of this product only by using in accordance with this label, or at a suitable landfill. Triple rinse container and add rinsate to the spray tank. Dispose of container to a suitable landfill or agricultural recycling scheme. Do not burn. Do not use container for any other purpose. ENVIRONMENTAL: Use this product carefully. Avoid unintentional contamination of aquatic environments. Spray drift or equipment contamination may cause serious damage to desirable plants. Do not allow spray drift outside the target area to occur. If accidental spraying occurs, immediately wash spray off foliage with plenty of water to minimize damage

Show in full

Weeds Table

For effective control, apply 2 liters/ha. For pasture manipulation, apply 0.7 - 1.4 liters/ha from December - April. Use higher rates for dense infestations. Burn 4 - 6 weeks after treatment.

Technology

Agrochemicals

Compatibility

GForce Max is compatible with commonly used herbicides.