SYNERGY™ MCPA 750
- Chemical Family
- Aryloxyphenoxy-propionates (FOPs)
1000 g/L trisiloxane alkoxylate Triclopyr 600 g/litre as the butoxy ethyl ester100 g/litre picloram as the amine salt and 300 g/litre triclopyr as the butoxy ethyl ester in the form of an emulsidiable concentrate.600 g/kg metsulfuron as hte methyl ester in the form of a water dispersible granule.An organosilicone penetrant/surfactant that enhances the penetration and uptake of herbicides.
Product families
Applications
- Cereals
- Fodder & Forage
- Oilseeds
- Sugar & Starch Crops
- Agricultural Pest Control
- Commercial Pest Control
- Residential Pest Control
- Turf Management
Product Families
- Herbicides
Other characteristics
- Brand
- Orion Agroscience SYNERGY
- Functions
- Herbicide
- HRAC/WSSA Group
- 9
- Formulation Type
- Concentrate Solutions
- Application Technique
- Aerial Application, Other Application Techniques
- Aerial Application
- Other Application Techniques
- Mixing
Pour the correct quantity of herbicide into the partly filled tank, then add the remaining water with agitation. Add the Synergy Penetrant last when the spray tank is almost full while ensuring there is adequate agitation.
- Markets
- Agriculture & Feed
- Spillage
Exclude non-essential people from the area. Wear protective clothing and prevent material from entering waterways. Absorb spill with inert material such as soil, sand, etc, and place in a waste container. Wash area with water and detergent, and absorb with further inert material. Dispose of safely to a suitable landfill.
- Precaution
STORAGE: Keep out of reach of children. Store in the original container in a secure place. Storage of certain quantities of this product trigger specific storage requirements (Refer to HazNote). PERSONAL PROTECTION: Avoid contact with eyes and skin. Avoid inhalation of spray mist. When mixing or applying, wear overalls, boots, gloves, and eye protection. Clean protective clothing daily after work. Do not eat, drink or smoke while using. Remove protective clothing and wash hands and face thoroughly before meals and after work. DISPOSAL: Dispose of this product only by using in accordance with this label. Triple rinse container and add rinsate to the spray tank. Dispose of container to a suitable landfil or agricultural recycling scheme. Do not burn. Do not use container for any other purpose. ENVIRONMENTAL: Use this product carefully. Do not contaminate aquatic environments with product, spray drift or empty container. Do not allow spray drift outside the target area to occur.
- Rainfastness
- Rainfast 30 minutes after application.
- Technology
- Agrochemicals
- Compatibility
Compatible with glyphosate and metsulfuron-methyl and most other brushweed herbicides.
- Packaging Type
- Drums
- Applicable Crop
- Barley
- Linseed
- Oats
- Rye
- Ryegrass
- Triticale
- Wheat
- General Information
Synergy™ Penetrant acts by increasing the contact area of the sprayed product and the leaf surface of the plant being sprayed. It will also act as a penetrant enhancing the speed of uptake of herbicide, particularly under adverse weather conditions.
- Product Information
An organosilicone penetrant/surfactant that enhances the penetration and uptake of herbicides.; HARMFUL • ECOTOXIC • KEEP OUT of REACH of CHILDREN; ACTIVE INGREDIENT: 840 g/l organomodified polydimethyl siloxane.; MAINTENANCE
- Application Rates
In mixture with the required amount of herbicide to control the appropriate weed. Always refer to the manufacturers' instructions for the products that Synergy Penetrant is to be used with and use those recommendations in preference if rates differ .
- Agrochemical Functions
- Herbicide
Technical data
Rates of Application
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Gorse | 2L/ha with at least 400 L/ha of water | 100 mL / 100 L | 10mL / 10 L |
| Bracken and Broom | 100 mL / 100 L | 100 mL / 100 L | 10mL / 10 L |
| Perennial Ryegrass | 100 mL / 100 L | 100 mL / 100 L | — |
