To catalogue

SYNERGY™ FLUMET 800

Chemical Family
Triazolopyrimidines

375 g/litre MCPB and 25 g/litre MCPA as the sodium salts in the form of a soluble concentrate.720 g/litre 2,4-D as the diethanolamine and dimethylamine salts in the form of a soluble concentrate. 800 g/kg flumetsulam in the form of a water dispersible granule.750 g/litre MCPA as the dimethylamine salt in the form of an soluable concentrate.For the control of broad leaf weeds in pasture, grass and white clover seed crops, peas and cereals.

Product families

Agrochemicals — Crop Protection & Pest Control
  • Herbicides

Other characteristics

Brand
Orion Agroscience SYNERGY
Functions
Herbicide
HRAC/WSSA Group
2
Formulation Type
Water-Dispersible Granules (WDG)
Application Technique
Sprayers
Herbicide Target Species
Broadleafs
Mixing

Partly fill the spray tank with water, and add the required quantity of Synergy MCPB/MCPA. Maintain agitation through filling and spraying.

Markets
Agriculture & Feed
Rainfall

Do not spray if rain is expected within 2 hours of spraying.

Spillage

Exclude non-essential people from the area. Wear protective clothing and prevent material from entering waterways. Absorb spill with inert material such as soil, sand, etc, and place in a waste container. Wash area with water, and absorb with further inert material. Dispose of safely to a suitable landfill.

Precaution

APPROVED HANDLER: This product must be under the control of an approved handler during use. STORAGE: Keep out of reach of children. Store in the original, tightly closed container, in a secure place away from foodstuffs. Storage of certain quantities of this product trigger specific storage requirements (Refer to Safety Note). When stored appropriately this product should show no significant degradation for two years from the date of manufacture. Contact your supplier for further information about the use of product that is older than this. PERSONAL PROTECTION: Avoid contact with eyes and skin. Avoid inhalation of spray mist. When mixing or applying, wear overalls, boots, gloves and eye protection. Clean protective clothing daily after work. Do not eat, drink or smoke while using. Remove protective clothing and wash hands and face thoroughly before meals and after work. USE: Apply with well maintained and calibrated spray equipment. DISPOSAL: Dispose of this product only by using in accordance with this label, or at a suitable landfill. Triple rinse container and add rinsate to the spray tank. Dispose of container to a suitable landfill or agricultural recycling scheme. Do not burn. Do not use container for any other purpose. ENVIRONMENTAL: Use this product carefully. Do not contaminate aquatic environments with product, spray drift or empty container. Spray drift or equipment contamination may cause serious damage to desirable plants. Do not allow spray drift outside the target area to occur.

Technology
Agrochemicals
Packaging Type
Cans
Applicable Crop
  • Chicory
  • Clover
  • Maize (corn)
  • Other Crops & Plants
Weeds Controlled

Weeds Not Controlled: Chickweed, chamomiles, cleavers, daisy, dandelion, docks (mature), ragwort, rushes, speedwell, spurrey, stinking mayweed

Application Methods

Synergy MCPB/MCPA can be applied with conventional ground and aerial equipment. Use a water rate of 150 – 250 liters per hectare for ground spraying. Use the higher rate to improve effectiveness on difficult to control perennial pasture weeds. For aerial application, use 30 – 100 liters of water per hectare. With aerial application, to minimize damage to susceptible vegetation within 500 meters, use low drift nozzles which minimize the production of small droplets (100 microns). For spot treatment, use at a rate of 10mL per liter (1% solution), and spray sufficient to wet foliage thoroughly

Technical data

Weeds Controlled

5 rows
CharacteristicValue
Annual buttercups, fathen, Scotch thistleControlled at all growth stages before flowering.
Black nightshade, giant buttercup, redroot, twin cressControlled at seedling stage (2 – 3 leaves). Useful suppression at later growth stages.
Californian thistleTreat at flower bud stage with 4L/ha
Cornbind, docks (seedling), hedge mustard, nettle, wild turnip, willow weed, wireweedControlled at seedling stage (2 – 3 leaves) only with 4L/ha. Useful suppression at later growth stages.
Thistles – Nodding, winged, variegatedControlled at seedling stage (2 – 3 leaves) with 4 L/ ha. Useful suppression at later growth stages

Directions For Use Rate And Timing of Application

5 rows
CharacteristicValueUnit
Cereals3 – 4 literss Apply when crop is between the 2 leaf stage and first node stage. Use the higher rate if weeds have more than 3 leaves. Do NOT use on crops undersown with lucerne or clover.
Grass Seed Crops (cocksfoot, dogstail, ryegrass, timothy, etc)—Apply to seedling weeds and well before crop seed head emergence.
Pasture—New Pasture: Apply after clover has developed 2 trifoliate leaves and when weeds are at the seedling stage. Established Pasture: Use higher rate if weeds are past the seedling stage.
Peas—Apply between the 5 - 7 node growth stage of the crop. Some temporary twisting of the crop may occur. Do NOT apply with other herbicides. As heavy rain may remove the crops protective waxy layer, delay treatment until crystal violet test confirms crop safety.
White Clover Seed Crops—Apply in spring to actively growing seedling weeds. Do NOT apply after the crop has commenced flowering.

The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.