Element™
- Chemical Family
- Pyrimidine-carboxylic-acids
150 g/litre picloram and 225 g/litre clopyralid Haloxyfop-p-methyl 100 g/litre organosilicone penetrant / surfactant Paraffinic oil and polyol fatty acid estersA selective herbicide for the control of certain broadleaf weeds in fodder brassicas and radiata pine.
Product families
- Herbicides
Other characteristics
- Brand
- Element
- Functions
- Herbicide
- HRAC/WSSA Group
- 4
- Formulation Type
- Concentrate Solutions
- Application Technique
- Aerial Application, Sprayers
- Herbicide Target Species
- Broadleafs
- Mixing
Pour the correct amount into the partly filled tank and add the remainder of the water while agitating. Where a spraying oil or penetrant is added, add this last to minimize foaming. Agitate thoroughly before and during spraying and before spraying after a stoppage.
- Markets
- Agriculture & Feed
- Spillage
Exclude non-essential people from the area. Wear protective clothing and prevent material from entering waterways. Absorb spill with inert material such as soil, sand, etc, and place in a waste container. Wash area with water, and absorb with further inert material. Dispose of safely to a suitable landfill.
- Precaution
APPROVED HANDLER: This product must only be sold to and used by an approved handler. STORAGE: Keep out of reach of children. Store in the original, tightly closed container, in a secure place. Storage of certain quantities of this product trigger specific storage requirements (Refer to Safety Note). When stored appropriately this product should show no significant degradation for two years from the date of manufacture. Contact your supplier for further information about the use of product that is older than this. PERSONAL PROTECTION: Avoid contact with eyes and skin. Avoid inhalation of spray mist. When mixing or applying, wear overalls, boots, gloves, and eye protection. Clean protective clothing daily after work. Do not eat, drink or smoke while using. Remove protective clothing and wash hands and face thoroughly before meals and after work. USE: Apply with well maintained and calibrated spray equipment. DISPOSAL: Dispose of this product only by using in accordance with this label, or at a suitable landfill. Triple rinse container and add rinsate to the spray tank. Dispose of container to a suitable landfill or agricultural recycling scheme. Do not burn. Do not use container for any other purpose. ENVIRONMENTAL: Use this product carefully. Do not contaminate aquatic environments with product, spray drift or empty container. Spray drift or equipment contamination may cause serious damage to desirable plants. Do not allow spray drift outside the target area to occur.
- Technology
- Agrochemicals
- Compatibility
Element is compatible with other forestry herbicides such as Hurricane®, Assett™ and Release® KT. When mixing with other herbicides, do NOT add Silmaxx.
- Soil Residues
Do NOT plant beans, cucurbits, lucerne, peas, potatoes, tomatoes, or other crops susceptible to picloram residues for at least 1 year after spraying. In situations of low rainfall or in heavy, poor draining soils, susceptible crops should NOT be planted for at least 2 years. For clovers, allow at least 6 months before planting, and deep plow and surface cultivate before sowing to minimize residues. Cereal crops may be drilled anytime after application. Avoid multiple applications as this can result in residue build up. For advice, contact your Orion Agriscience field representative.
- Packaging Type
- Cans
- Applicable Crop
- Other Crops & Plants
- Pine Nut
- Rapeseed
Technical data
Directions For Use
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Fodder Brassicas | Black nightshade, fathen, redroot (suppression only), thornapple | 350 mL/ ha + 500 mL/100L Synoil™ | Apply to actively growing 2 – 8 true leaf seedlings. The timing of the application is determined by the growth stage and activity of the weeds rather that the crop. |
| Radiata Pine | Broom, gorse Fireweed, fleabane, foxglove, ragwort, tree lucerne, wattles, wooly nightshade Thistles | 2 – 2.5 L/ ha + 500 mL/ha Silmaxx™ 2 L/ha 1 L/ha | For maximum suppression, apply during the period of soft active growth when there is good soil moisture. For broom and gorse, apply when between 10 – 50 cm high. Application outside this size may result in reduced suppression. For effective weed suppression, do NOT apply beyond the end of February in the growth season. In some situations, retreatment the following season may be beneficial. New growth from stumps or coppicing may not be suppressed. Twisting of needles or stems may occur. This is transient and will have no long term effect on the tree. |
