Release® KT
- Chemical Family
- Triazinones
435 g/litre terbuthylazine + 65 g/litre hexazinone Terbuthylazine 500 g/litre Haloxyfop-p-methyl 100 g/litre 900g/kg of hexazinone in the form of a water dispersible granuleA selective herbicide for the control of grass and broad leaf weeds in radiata pine.
Product families
- Herbicides
Other characteristics
- Brand
- Orion Agroscience Release
- Functions
- Herbicide
- HRAC/WSSA Group
- 5
- Formulation Type
- Suspension Concentrates
- Application Technique
Aerial Application, Ground Soil Applied, Sprayers
- Herbicide Target Species
- Broadleafs, Grasses
- Mixing
As settling may occur during storage, stir or shake well before use. Add the required quantity to the spray tank partly filled with water, and maintain agitation through filling and spraying. Only mix sufficient spray solution for immediate use.
- Markets
- Agriculture & Feed
- Precaution
Keep out of reach of children. Avoid contact with eyes and skin. Do not breathe in the spray mist. Do not eat, drink or smoke during use. Wash hands after use. STORAGE: Store in the original tightly closed container in a secure area. When stored appropriately this product should show no significant degradation for two years from the date of manufacture. Contact your supplier for further information about the use of product that is older than this. PROTECTIVE EQUIPMENT: When mixing or applying, wear chemical resistant overalls, boots, gloves, head covering and eye protection. Wear a respirator if spray mist could be inhaled. Clean protective equipment after use. Do not take contaminated equipment or clothing off site. Wash contaminated clothing before reuse. USE: Apply with well maintained and calibrated spray equipment. Application must be by a qualified loader, contractor or person. DISPOSAL: Dispose of this product by using it in accordance with this label. Dispose of the container via AgRecovery after triple rinsing (use the rinsate for spraying). Do not burn. Do not use the container for any other purpose. ENVIRONMENTAL: Take all reasonable steps to ensure that this product does not cause any significant adverse effects to the environment beyond the application area. Do not apply directly into or onto water. In the event of spillage, exclude non-essential people from the area. Wear protective equipment and prevent from entering drains. Contain and collect spillage for disposal.
- Technology
- Agrochemicals
- Compatibility
Release KT is compatible with other herbicides commonly used in forestry.
- Packaging Type
- Cans
- Applicable Crop
- Pine Nut
- Use Direction
Broadcast: 15 – 17.5 L of Release KT in 150 - 300 liters water per hectare. Spot Application: Calibrate equipment carefully to deliver 1.5 – 2 mL of Release KT per square meter in sufficient water to gain good coverage. Treat 2 square meters (i.e. 1.6m diameter spot) around each tree. Spotgun: Mix 110 mL of Release KT in 1 liter of water and apply 15 – 20 mL of the mixture per square meter. Knapsack: Mix 55 mL of Release KT in 1 liter of water and apply 30 – 40 mL of the mixture per square meter. Use the higher rates on seedling gorse, or tall, rank weed growth, or where a longer residual is required. The addition of a wetting agent is not required. Apply prior to spring growth in September - October. If necessary, a repeat application can be made 12 months later. Note: For control of difficult to kill grasses like paspalum, kikuyu, couch or mercer grass, add Hurricane®.
