To catalogue

VOID™

300 g/litre clopyralid Glyphosate as the isopropylamine salt 360 g/litre Paraquat 200 g/litre 680 g/litre 2,4-D as the ethylhexyl ester in the form of an A selective herbicide used to control clovers, yarrow, plantains, californian and other thistles in a range of crops, turf, forestry and pre-cultivation.

Other characteristics

Brand
VOID
Functions
Herbicide
HRAC/WSSA Group
4
Formulation Type
Concentrate Solutions
Application Technique
Sprayers
Herbicide Target Species
Broadleafs
Mixing

Add the required quantity of Void to the spray tank partly filled with water, and maintain agitation through filling and spraying.

Clovers

Void is damaging to clovers. Rates of 100ml/ha may severely depress clovers in pasture for 2 - 6 months. Higher rates will remove clover from pasture.

Markets
Agriculture & Feed
Rainfall

Do not spray if rain is expected within 3 hours of spraying.

Spillage

Exclude non-essential people from the area. Wear protective clothing and prevent material from entering waterways. Absorb spill with inert material such as soil, sand, etc, and place in a waste container. Wash area with water and detergent, and absorb with further inert material. Dispose of safely to a suitable landfill.

Precaution

APPROVED HANDLER: This product must only be sold to and used by an approved handler. STORAGE: Keep out of reach of children. Store in the original, tightly closed container away from foodstuffs. Storage of certain quantities of this product trigger specific storage requirements (Refer to Safety Note). When stored appropriately this product should show no significant degradation for two years from the date of manufacture. Contact your supplier for further information about the use of product that is older than this. PERSONAL PROTECTION: Avoid contact with eyes and skin. Avoid inhalation of spray mist. When mixing or applying, wear overalls, boots, gloves and eye protection. Clean protective clothing daily after work. Do not eat, drink or smoke while using. Remove protective clothing and wash hands and face thoroughly before meals and after work. USE: Apply with well maintained and calibrated spray equipment. DISPOSAL: Dispose of this product only by using in accordance with this label, or at a suitable landfill. Do not burn. Triple rinse container and add rinsate to the spray tank. Dispose of container to a suitable landfill or agricultural recycling scheme. Do not burn. Do not use container for any other purpose. ENVIRONMENTAL: Use this product carefully. Do not contaminate aquatic environments with product, spray drift or empty container. Spray drift or equipment contamination may cause serious damage to desirable plants. Do not allow spray drift outside the target area to occur.

Technology
Agrochemicals
Compatibility

Void is compatible with most commonly used herbicides, as well as Chlor-PTM 480EC.

Crop Residue

Do NOT compost or mulch clippings from treated areas for 6 months after treatment. Do NOT use straw from Void treated cereal crops for compost or mulch.

Soil Residues

Do NOT plant peas, beans, clover, carrots, cucurbits, potatoes or tomatoes within 12 weeks of applying up to 0.5 liters/ha. In areas where more than 0.5 liters/ha has been applied, do NOT plant susceptible crops within 6 - 12 months. Within this time, check soil residues by planting out a small area first. Brassicas, cereal and ryegrass crops may be drilled anytime after application.

Packaging Type
Cans

Technical data

Directions For Use

4 rows
CharacteristicValueUnitMethod
Asparagus Pre-cutting During cutting Post-harvestCalifornian thistles, thistles, Clovers and Yarrow0.5 - 1.0 liter/ha 0.5 liter/ha 0.5 - 1.0 liter/haSpray to within 3 days of cutting Do not cut within 3 days of application Apply over spears. Use directed application if spears are opening or ferns are present. Some damage may occur if sprayed over open spears or mature fronds
Beet – fodder and sugar beetsCalifornian thistles and yarrow0.5 - 1.0 liter/haApply after the 2 true leaf stage of the crop and before bulbous root formation
Field brassicasCalifornian and other thistles, yarrow0.5 - 1.0 liter/haApply after the 2 true leaf stage of the crop and before the crop closes over.
Cereals Caution: Do not use treated straw for compost or mulch.Californian thistle and yarrow Volunteer potatoes0.3 - 1.0 liter/ha 1 liter/haApply after the 2nd leaf but before the 2nd node crop stage. When tank mixing with other herbicides, use the timing recommended for that herbicide. Apply after full potato emergence but before tuber formation.

Directions For Use

6 rows
CharacteristicValueUnitMethod
Conservation tillage – brassicas, cereals, ryegrassClovers, plantains, thistles Californian thistles Yarrow0.5 - 0.7 liters/ha 1 liter/ha 1 liter/haApply to actively growing weeds. Apply from the rosette to early flower stage. Re-treatment may be needed. Apply to actively growing plants from autumn to spring. Surface cultivate no less than a week after treatment. Void can be tanked mixed with PQ 200™, Glyphosate 360 or Turbo™ 300 for increased weed control spectrum in conservation tillage. When tank mixing with other herbicides, use the timing recommended for that herbicide
Forestry – radiata pine Handgun application Mistblower applicationGorse, broom, wattle10 liters/ha plus 1 liter/ha Brush Off® plus a non-ionic surfactant 500 ml/100 liters of water 40 ml/liter of wateSpray over gorse and broom after flowering and during soft spring growth. Treat gorse up to 1 meter high for best results. For best results on wattles, apply to actively growing plants less than 2 meters tall. Green wattle is not controlled. Silver and brush wattle is controlled. Temporary light tree damage in the form of distortion may occur, particularly where trees are well above competing weeds. Obtain thorough coverage. Add a non-ionic surfactant. Use a No. 6 - 8 tip at 1000 - 2500 kPa. Add a non-ionic surfactant. For ULV spraying use 200 ml/liter of water with number 3 or 4 hole.
Maize, sweetcornCalifornian thistle, bathurst bur, yarrow Volunteer potatoesSpray after the 3 expanded leaf stage of the maize but before the crop closes over. Apply after full potato emergence but before tuber formation.—
Orchards – citrus, pipfruit, stonefruitBroadleaf weedsRefer to TurfFor use in mature orchards to control susceptible weeds. Use as directed for turf amenity areas. Minimize contact with trees by direct spraying weeds.
Shelter and ornamental treesBroadleaf weeds1 - 2 liters/haUse rates for weeds present. Before use test tolerance on a small number of trees. Apply as a directed spray. Do not apply to legumes or Compositae.
PastureHard to Kill thistlesSee critical commentsIn pasture add 100 - 200ml/ha Void to Thistle KillemTM Ultra for hard to kill thistles.

Directions For Use

1 row
CharacteristicValueUnitMethod
Turf and amenity areasClover Californian thistles Other thistles Bathurst bur, daisy, dandelion, hawksbeard, hawkbit, medics, Onehunga weed, ox-eye daisy, plantains, annual and biennial thistles. Yarrow Catsear, fireweed Ragwort, sow thistle, lotus Cape daisy Hemlock Lupin Old mans beard Broom, gorse0.7 liter/ha or 70 ml/100 liters water 1 liter/ha or 100 ml/100 liters water 0.5 liter/ha 1.0 liter/ha 1 liter/ha or 100ml/100 liters water. 1 liter/ha or 100ml/100 liters water. 1.5 liters/ha or 150ml/100 liters water 2 liters/ha or 200 ml/100 liters of water 1-2 liters/ha or 200ml/100 liters water 100ml/100 liters water 200ml/100 liters water 12 - 25 liters/ha or 500ml/100 liters water 500ml/100 liters waterApply to actively growing plants Apply during the bud stage but before flowering. Re-treatment may be needed. Apply from the rosette stage but before flowerin Apply during the bud-early flowering stage. Apply to actively growing plants. Apply to actively growing plants. More than one application may be needed on mature matted plants. Apply to actively growing plants. Apply to actively growing rosettes. For seedling or small multicrown ragwort mix 100 - 200mls of Void with Thistle KillemTM Ultra at label rates. Apply to actively growing rosettes. Use the lighter rate on seedlings. Apply to actively growing plants. Apply to actively growing plants. Apply to actively growing plants. Apply to actively growing plants between October and January.

The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.