BLAST™

Other characteristics

Brand

BLAST

Functions

Herbicide

HRAC/WSSA Group

2

Formulation Type

Water-Dispersible Granules (WDG)

Application Technique

Aerial Application, Sprayers

Herbicide Target Species

Broadleafs

Mixing

Add the required quantity of Blast to the spray tank partly filled with water, and maintain agitation through filling and spraying. Add Synoil last if used. Only mix sufficient spray solution for immediate use. Do not store spray solutions.

Markets

Agriculture & Feed

Spillage

Exclude non-essential people from the area. Wear protective clothing. Moisten to prevent dusting and sweep up. Place in a waste container. Dispose of safely to a suitable landfill.

Precaution

APPROVED HANDLER: This product must be under the control of an approved handler during use. STORAGE: Keep out of reach of children. Store in the original, tightly closed container, in a secure place. Storage of certain quantities of this product trigger specific storage requirements (Refer to Safety Note). When stored appropriately this product should show no significant degradation for two years from the date of manufacture. Contact your supplier for further information about the use of product that is older than this. PERSONAL PROTECTION: Avoid contact with eyes and skin. Avoid inhalation of dust or spray mist. When mixing or applying, wear overalls, boots, gloves and eye protection. Clean protective clothing daily after work. Do not eat, drink or smoke while using. Remove protective clothing and wash hands and face thoroughly before meals and after work. USE: Apply with well maintained and calibrated spray equipment. DISPOSAL: Dispose of this product only by using in accordance with this label, or at a suitable landfill. Do not burn. Dispose of packaging to a suitable landfill. Do not burn. Do not use packaging for any other purpose. ENVIRONMENTAL: Use this product carefully. Do not contaminate aquatic environments with product, spray drift or packaging. Spray drift or equipment contamination may cause serious damage to desirable plants. Do not allow spray drift outside the target area to occur. Do not use or flush equipment near to desirable plants or their roots. Do not use the same equipment to apply other chemicals to susceptible crops unless thoroughly cleaned and decontaminated.

Show in full

Technology

Agrochemicals

Compatibility

Blast is compatible with most commonly used herbicides. In pasture, the addition of Tandem® will increase the range of broadleaf weeds controlled. If using with 2,4-D products such as Ammo® Max or Thistle Killem™ Ultra, use with a spray oil will increase clover damage and is not recommended unless the pasture has been well grazed prior to spraying. Do not mix Blast with spraying oil when using with triazine herbicides, e.g., Atraflow® (atrazine) on lucerne.

Show in full

Soil Residues

Do not plant susceptible crops within 3 months of application. Susceptible crops include all brassica species, beans, lupins and sunflowers.

Packaging Type

Bottles

Applicable Crop

• Chicory
• Clover
• Maize (corn)
• Other Crops & Plants