IonoVit 0
IonoVit 0 is a water-based product with proper additives and guarantees the production of reproducible and high-quality drillings for electrode diameters starting from 0,1 mm. IonoVit 0 is a ready-to-use product, so that mixing is not necessary. The Brix value is in a range of 5% – 7%. A dielectric aggregate (water treatment) is required which, in combination with a mixed resin cartridge, ensures good quality and keeps the water conductance at less than 10 uS/cm. If the water conductance increases, the mixed resin cartridge must be replaced. The medium should also be cooled, because otherwise no constant performance can be achieved. For this product it is recommended to integrate a cooling spiral into the existing cooling circuit (recommended for reproducible quality).
Properties
- Peripheral Requirement
Water treatment; Dielectric aggregate with filter and deionised resin absolutely necessary; Integrate the cooling coil into the cooling system - recommended for reproducible quality (option) -; Good electrode quality (electrode with bar)
Product families
Applications
- Equipment & Parts
- Metal Manufacturing & Finishing
Product Families
- Metalworking Fluids
Other characteristics
- Brand
- IonoVit
- Features
Corrosion Resistant, Excellent Lubricity, High Dielectric Strength, High Performance, Non-Foaming, Tear Resistance, Wear Resistant
- Application Area
Drilling Applications, Electrical Discharge Machining, Machining Operations; Drilling Applications; Electrical Discharge Machining; Machining Operations
- Compatible Substrates & Surfaces
- Aluminum, Metal
- Markets
- Industrial
- Advantages
No foam formation; No machine contamination; Dielectric for precision holes; High-quality precision drilling of small diameters of 0.5 mm possible
- Product Type
- Metalworking Fluids
- Technology
- Ready-to-Use Products
- Labeling Claims
- Chlorine-free
- Heavy Metal-free
- Water Treatment
Dielectric unit with filter and deionized resin – absolutely necessary Integrate cooling coil into the existing cooling circuit = recommended for reproducible quality (option). Good electrode quality (electrode with bar).
- Measuring Device
Refractometer 5% - 7% Brix (water down only with deionised water); Conductivity meter: conductance 0 - 10 μS/cm; pH-value test strip 5 - 7
- Ready to Use Product Features
- Corrosion Resistant
- Excellent Lubricity
- High Dielectric Strength
- High Performance
- Non-Foaming
- Tear Resistance
- Wear Resistant
- Compatible Substrates and Surfaces
- Aluminum
- Metal
- Is Particularly Characterized By:
Steel machining:; No corrosion formation; Free of heavy metal and chlorine compounds; Carbide machining:; No visible cobalt leaching at bore entrance; Technological changes at the machine are not necessary; No machine soiling
