To catalogue
SLH118
- Chemical Family
- PolyethylenesPolyolefins
SLH118 is a Linear Low Density Polyethylene developed specifically for blown film extrusion. Films made with this product exhibit a balanced combination of good processing performance, optical and mechanical properties, and sealability. The resin contains very low gel amount and includes oxidant additives. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866.\nFor more information regarding REACH, please visit Braskem's REACH site
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Building & Construction — Building Materials
- Pipes & Plumbing
Printing & Packaging — Packaging
- Non-Food Consumer Packaging
Product Families
Plastics — Basic Thermoplastics
- Polyolefins
Other characteristics
- Brand
- I'm green bio-based
- Polymer Name
- Linear Low Density Polyethylene (LLDPE)
- Melt Flow Index
- 1.0 g/10 min
- Additives Included
- Antioxidant
- Processing Methods
Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion
- Note
Blown Film Properties:; Film with 40 microns produce in a 40mm extruder and a blow‐up ratio of 2.2:1. (MD = extrusion direction and TD = transversal direction).
- Markets
- Building & Construction
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Bio-based
- Carbon Black-free
- Dye Free
- Low Carbon Footprint (PCF)
- Pigment-free
- Recyclable
- Quality Standards
- In Preview
- Material Features
- Excellent Sealability
- Good Mechanical Properties
- Good Optical Properties
- Good Processability
- Low Carbon Content
- Low Gel
- Renewable Resource Content
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- EINECS (EU)
- ENCS (Japan)
- IECSC (China)
- NZIoC (New Zealand)
- PICCS (Phillipines)
- TCSI (Taiwan)
- Certifications and Compliance
- ANVISA Resolution RDC No. 105/1999
- ANVISA Resolution RDC No. 326/2019
- ANVISA Resolution RDC No. 56/2012
- ANVISA Resolution RDC No. 91/2001
- Directive 1333/2008/EC
- EC No. 2023/2006
- EC No.1907/2006
- MERCOSUR Resolution GMC No. 02/12
- Compatible Polymers and Resins
- High-Density Polyethylene (HDPE)
- Low-Density Polyethylene (LDPE)
- Plastics and Elastomers End Uses
- Blown Films
- Cast Films
- Cosmetic Packaging
- Film
- Flexible Packaging
- Industrial Liners
- Industrial Sacks
- Irrigation Pipes
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Blown Film Extrusion
- Cast Film Extrusion
- Extrusion
- Film Extrusion
Technical data
Table 1 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| C14 Content | min. 84 | % | ASTM D 6866 |
Table 2 of 3
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (at Break, MD) | 40.0 | MPa | ASTM D882 |
| Tensile Strength (at Break, TD) | 40.0 | MPa | ASTM D882 |
| Elongation (at Break, MD) | 1080.0 | % | ASTM D882 |
| Elongation (at Break, TD) | 1360.0 | % | ASTM D882 |
| Flexural Modulus (1% Secant, MD) | 200.0 | MPa | ASTM D882 |
| Flexural Modulus (1% Secant, TD) | 210.0 | MPa | ASTM D882 |
| Dart Drop Impact Strength | 150.0 | g/F50 | ASTM D1709 |
| Elmendorf Tear Strength (MD) | 300.0 | gF | ASTM D1922 |
| Elmendorf Tear Strength (TD) | 510.0 | gF | ASTM D1922 |
Table 3 of 3
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (at 190°C, 2.16kg) | 1.0 | g/10 min | ASTM D1238 |
| Density | 0.916 | g/cm³ | ASTM D1505 |
