UTEC® 4041

Properties

Physical Form

• Powder
• Solid

Product families

Other characteristics

Brand

UTEC

Polymer Name

Ultra High Molecular Weight Polyethylene (UHMWPE)

Processing Methods

Compression Molding, Ram Extrusion

Average Particle Size

160.0 microns

Average Molecular Weight

4,000,000.0 g/mol

Markets

• Agriculture & Feed
• Automotive & Transportation
• Building & Construction
• Electrical & Electronics

Soluble In

Organic Solvent Soluble

Technology

Plastics

Material Features

• Abrasion Resistant
• Extremely High Molecular Weight
• Good Impact Strength
• Impact Resistance
• Low Coefficient of Friction
• Low Friction
• Self Lubricating
• Ultra High Molecular Weight Polyethylene
• 1 more

HIGHLIGHTS

UTEC is the best solution compared to other materials because of its remarkable impact strength.; UTEC is an excellent material for sliding applications where low coefficient of friction properties are required, working as a self-lubricating material.; UTEC is extremely resistant to a wide variety of substances. The material is almost totally inert; therefore, it can be used in the most corrosive or aggressive environments at moderate temperatures. Even at high temperatures, UTEC is resistant to several solvents, except aromatic, halogenated hydrocarbons and strong oxidizing materials, such as nitric acid.; Compatibility tests between a product sample and the chemical environment are strongly recommended to verify satisfactory part performance, at the same conditions, for a period of time equal to the life time expected for each new application. Even substances classified with high attack or absorption characteristics show good practical results.; Another outstanding UTEC property is the abrasion wear resistance. This makes UTEC suitable for replacing metals in applications that require high abrasion resistance while providing light-weighting benefits.; It is not possible to process UTEC through conventional extrusion methods or injection or blow molding, because this material does not flow even at temperatures above its melting point. UTEC requires special processing techniques, such as RAM extrusion and compression molding. These processes are generally used to produce semi-finished parts such as rods and sheets. UTEC can be sintered into porous parts (filters) and calendered into porous sheets. It can also be gel processed into fibers or for a variety of battery separator applications.; Those semi-finished parts can then be machined into parts for a wide range of applications. It is possible to use the same machining techniques as those used for wood or metal, such as sawing, milling, planing, drilling and turning. Other conversion processesmay also be used.; The UTEC molecular structure has direct impact on its physical and thermal properties as well as processing performance. There are some characterization methods which can be used to measure the molecular weight of polymers. In the case of UHMWPE resins, the viscosity of polymer diluted solutions is widely used for that purpose.

Show in full

Certifications and Compliance

SARA 311/312

Plastics and Elastomers End Uses

• Filters
• Pipes

Plastics and Elastomers Functions

Resin

Known For

Applications which require a good balance of impact and wear resistance - technical and porous parts, filters, fibers, and RAM extruded/ compression molded rods, sheets, profiles, and pipes.

Plastics and Elastomers Processing Methods

• Compression Molding
• Ram Extrusion