SEB853
- Chemical Family
- PolyethylenesPolyolefins
SEB853 is a low density polyethylene produced using high-pressure technology. This grade is specifically designed for film applications. Films made with SEB853 exhibit exceptional optical properties, excellent sealability, and low gel content. Additionally, this product is free from additives. With a minimum carbon biobased content of 95%, as determined by ASTM D6866, SEB853 aligns with sustainable practices.\nFor more information regarding REACH, please visit Braskem's REACH site
Properties
- Physical Form
- Granules
- Pellets
- Solid
Product families
Applications
- Food & Beverage Packaging
- Non-Food Consumer Packaging
- Baby Diapers
Product Families
- Polyolefins
Other characteristics
- Brand
- I'm green bio-based
- Polymer Name
- Low Density Polyethylene (LDPE)
- Melt Flow Index
- 2.7 g/10 min
- Processing Methods
Blow Molding, Cast Film Extrusion, Extrusion, Film Extrusion, Profile Extrusion, Tubing Extrusion
- Note
Blown Film Properties:; 40 μm thickness film in a 75mm screw diameter extruder with blow up ratio of 2.2:1. (MD: Machine Direction; TD: Transversal Direction)
- Markets
- Personal Care
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Additive-free
- Bio-based
- Low Carbon Footprint (PCF)
- Recyclable
- Sustainable
- Sustainable Polyethylene
- Quality Standards
- In Preview
- Material Features
- Excellent Sealability
- Good Optical Properties
- Low Carbon Content
- Low Gel
- Renewable Resource Content
- Chemical Inventories
- DSL (Canada)
- TSCA (USA)
- Certifications and Compliance
Comprehensive Environmental Response Compensations & Liability Act (CERCLA); EC No.1907/2006
- Compatible Polymers and Resins
- High-Density Polyethylene (HDPE)
- Linear Low Density Polyethylene (LLDPE)
- Plastics and Elastomers End Uses
- Blown Films
- Cast Films
- Cosmetic Packaging
- Diaper Films
- Film
- Flexible Packaging
- Food Packaging
- Food Tubes
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Blow Molding
- Cast Film Extrusion
- Extrusion
- Film Extrusion
- Profile Extrusion
- Tubing Extrusion
Technical data
Table 1 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| C14 Content | min. 95 | % | ASTM D 6866 |
Table 2 of 3
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (at Break, MD) ¹ | 25.0 | MPa | ASTM D882 |
| Tensile Strength (at Break, TD) ¹ | 20.0 | MPa | ASTM D882 |
| Elongation (at Break, MD) ¹ | 350.0 | % | ASTM D882 |
| Elongation (at Break, TD) ¹ | 1050.0 | % | ASTM D882 |
| Dart Drop Impact Strength ¹ | 80.0 | g/F50 | ASTM D1709 |
| Elmendorf Tear Strength (MD) ¹ | 580.0 | gF | ASTM D1922 |
| Elmendorf Tear Strength (TD) ¹ | 210.0 | gF | ASTM D1922 |
| Haze ¹ | 7.0 | % | ASTM D1003 |
| Gloss (Angle 60°) ¹ | 75.0 | % | ASTM D2457 |
Table 3 of 3
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (at 190°C, 2.16kg) | 2.7 | g/10 min | ASTM D1238 |
| Density | 0.923 | g/cm³ | ASTM D1505 |
