SGF4950HS
- Chemical Family
- PolyethylenesPolyolefins
SGF4950HS is a High Density Polyethylene copolymer that provides a remarkable combination of good processability and excellent stress cracking resistance (ESCR). It is highly recommended for manufacturing containers, flasks, and bottles up to 30 liters for transporting chemical products. This grade has a minimum biobased carbon content of 95%, as determined by ASTM D6866.\nFor more information regarding REACH, please visit Braskem's REACH site
Properties
- Physical Form
- Granules
- Pellets
- Solid
Product families
Applications
- Cooling & Climate
- Food & Beverage Packaging
- Non-Food Consumer Packaging
Product Families
- Polyolefins
Other characteristics
- Brand
- I'm green bio-based
- Polymer Name
- High Density Polyethylene (HDPE)
- Melt Flow Index
- 20.0 g/10 min
- Processing Methods
Blow Molding, Compression Molding, Extrusion Blow Molding (EBM), Tubing Extrusion
- Note
Typical properties correspond to average values obtained in our laboratories. Test specimens prepared from compression molded sheet made according to ASTM D 4703. Thickness of test piece: a) 2 mm; b) 3 mm.
- Markets
- Automotive & Transportation
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Bio-based
- Carbon Black-free
- Dye Free
- Low Carbon Footprint (PCF)
- Pigment-free
- Recyclable
- Quality Standards
- In Preview
- Material Features
Good Environmental Stress Crack Resistance (ESCR); Good Processability; Low Carbon Content; Renewable Resource Content
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- EINECS (EU)
- ENCS (Japan)
- IECSC (China)
- ISHL (Japan)
- KECI (Korea)
- NCI (Vietnam)
- Certifications and Compliance
ANVISA Resolution RDC No. 105/1999; ANVISA Resolution RDC No. 326/2019; ANVISA Resolution RDC No. 56/2012; ANVISA Resolution RDC No. 91/2001; Comprehensive Environmental Response Compensations & Liability Act (CERCLA); Directive 1333/2008/EC; EC No. 2023/2006; EC No.1907/2006; MERCOSUR Resolution GMC No. 02/12; MERCOSUR Resolution GMC No. 03/92; MERCOSUR Resolution GMC No. 39/19; MERCOSUR Resolution GMC No. 56/92; Regulation (EC) No. 1334/2008; Regulation (EU) No. 10/2011 (PIM); Regulation (EU) No. 1935/2004; Regulation (EU) No. 2023/1627
- Plastics and Elastomers End Uses
- Air Ducts
- Bottles
- Chemical Canister
- Chemical Containers
- Containers
- Detergent Bottle
- Flasks
- Fluid Tanks
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Blow Molding
- Compression Molding
- Extrusion Blow Molding (EBM)
- Tubing Extrusion
Technical data
Table 1 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| C14 Content | min. 95 | % | ASTM D 6866 |
Table 2 of 3
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (at 190°C, 2.16kg) | 0.21 | g/10 min | ASTM D1238 |
| Density | 0.951 | g/cm³ | ASTM D792 |
Table 3 of 3
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (at 190°C, 21.6kg) | 20.0 | g/10 min | ASTM D 1238 |
| Tensile Strength (at Yield) ᵃ | 25.0 | MPa | ASTM D 638 |
| Tensile Strength (at Break) ᵃ | 35.0 | MPa | ASTM D 638 |
| Flexural Modulus (1% Secant) ᵇ | 1100.0 | MPa | ASTM D 790 |
| Tensile Impact Strength (at 23°C) | 110.0 | kJ/m² | ISO 8256 |
| Deflection Temperature Under Load (at 0.455 MPa) ᵇ | 70.0 | °C | ASTM D 648 |
| FNCT | 300.0 | min | Braskem Method |
