Chemguard S-764P-14A
Chemguard S-764P-14A High Performance Anionic Fluorosurfactant is a short-chain, phosphate ester type fluorosurfactant. It is water-based and free from volatile organic compounds (VOC). It provides surface tensions as low as 18 dyn/cm in water at very low concentrations. Chemguard S-764P-14A imparts excellent wetting, spreading, leveling, anti-blocking, and flow control properties on various types of water-based coatings for architectural paints and stains, concrete coatings, industrial coatings, and hydrocarbon surfactant solutions. Chemguard S-764P-14A has excellent dynamic surface tension properties which allow for the rapid attainment of low equilibrium surface tensions. It is low foaming and can provide improved dirt pick-up resistance to exterior paints and interior low-gloss paints, sealers, and stains.
Properties
- Physical Form
- Liquid
Product families
- Functional Additives
Other characteristics
- End Uses
- Waterborne Coating
- Features
Anti-Orange Peel Effect; VOC free; Chloride free; Low foaming; Imparts excellent anti-blocking characteristics; Delivers low surface tension at low concentrations; Effective at wetting difficult to coat surfaces; Minimizes surface defects such as cratering and fisheyes; Provides oil repellency to water-based stains
- Functions
- Leveling Agent, Surfactant (Anionic)
- Labeling Claims
- Other Labeling Claims, VOC-free
- Other Labeling Claims
- VOC-free
- Markets
- Adhesives & Sealants
- Building & Construction
- Paints & Coatings
- Printing & Packaging
- Appearance
- Clear to light yellow liquid
- Solubility
Chemguard S-764P-14A is soluble in water and most organic solvents. Deionized water (DI water) or soft water is recommended as dilution of this product in hard water can cause precipitation and should be avoided.
- Application
Chemguard S-764P-14A High Performance Anionic Fluorosurfactant is a dilute aqueous solution composed of 14% active fluorosurfactant. Typical uses include leveling and oil repellency for floor polishes, paints and coatings, adhesives, inks, waxes, caulks, and wood stains.; Chemguard S-764P-14A can minimize common surface defects in paints and coatings such as fisheyes, orange peel effects, and cratering. It is effective in improving anti-blocking for the new low-VOC and no-VOC paints in both semi-gloss and high-gloss formulas.; The application of Chemguard S-764P-14A is generally employed when typical hydrocarbon surfactants are inadequate. Fluorosurfactants, such as Chemguard S-764P-14A, are more chemically stable than typical hydrocarbon surfactants, particularly in the presence of acids, alkalies, or heat. Recommended application rates depend on the formulation makeup, but typical levels of 0.01% to 0.30% are common. To determine the correct application rate level, screen several ranges of concentration to achieve the desired effect on the surface tension and wetting action.
- Coating Type
- Waterborne Coating
- Technology
- CASE Ingredients
- Ionic Character
- Anionic
- Health and Safety
Chemguard S-764P-14A High Performance Anionic Fluorosurfactant is not recommended for use in applications involving repeated exposure to skin contact, inhalation, or ingestion.. Chemguard fluorosurfactants are based on the telomer synthesis process and are composed of chains of six fluorinated carbons. The telomer process produces no perfluorooctane sulfonate (PFOS), and C6 materials do not break down to yield perfluorooctanoic acid (PFOA).
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Percent Actives | 14 | % |
| Aqueous Surface Tension in DI Water (25°C, 0.001% Actives) | 25 | mN/m |
| pH | 9.0 - 10.0 | — |
| Aqueous Surface Tension in DI Water (25°C, 0.01% Actives) | 20 | mN/m |
| Aqueous Surface Tension in DI Water (25°C, 0.1% Actives) | 18 | mN/m |
| Freezing Point | 5 | °C |
| Density (25°C) | 1.1 | g/ml |
| Viscosity | 800 | cP |
| Flash Point (Pensky-Martens, Closed Cup) | min. 95 | °C |
| Refractive Index (25°C) | 1.3330 - 1.3370 | — |
