Chemguard S-550-100
- CASE Ingredients Features
- Anti-Orange Peel EffectExcellent FlowGood LevelingImproved Substrate Wetting
Chemguard S-550-100 High Performance Nonionic Fluorosurfactant is a 100% active ethoxylated nonionic fluorosurfactant. It provides surface tensions as low as 18 dyn/cm in water at low concentrations, and is surface active in many other solvents. Chemguard S-550-100 imparts enhanced wetting, spreading, leveling, and flow control properties to various types of waterbased and solvent-based coating formulations. It is ideal for coating formulations designed to coat difficult substrates because of its extremely low equilibrium surface tension and excellent dynamic surface tension properties.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Surfactant (Anionic)Surfactant (Nonionic)
Product families
- Printing & Packaging — Other Printing & Packaging Applications
- Floor Coatings
- Floor Coatings
- Industrial Coatings
- Industrial Maintenance
- Other Printing Applications
Other characteristics
- End Uses
- Solventborne Coating, Waterborne Coating
- Functions
- Surfactant (Anionic), Surfactant (Nonionic)
- Labeling Claims
- VOC-free
- Markets
- Building & Construction
- Paints & Coatings
- Printing & Packaging
- Features
Free from volatile organic compounds (VOC); Non-flammable; Effective in both high and low pH; Provides exceptionally low surface tension in aqueous and solvent-based products; Improves leveling performance
- Appearance
- Clear, orange liquid with sediment
- Solubility
Chemguard S-550-100 High Performance Nonionic Fluorosurfactant is sparingly soluble in water and most organic solvents.
- Application
Chemguard S-550-100 High Performance Nonionic Fluorosurfactant can improve wetting and leveling, and reduce defects such as cratering and orange peel. Typical uses include leveling and surface tension reducing agents for floor care applications, paints and coatings, inks, industrial and institutional cleaners, and oilfield operations.. Chemguard S-550-100 is generally employed when typical hydrocarbon surfactants are inadequate, particularly in the presence of acids, alkalies, or heat. Recommended application rates depend on the formulation makeup, but typical levels of 0.05% to 0.30% are common. To determine the correct application rate level, screen several ranges of concentration to achieve the desired effect on the surface tension and wetting action.
- Coating Type
- Solventborne Coating
- Waterborne Coating
- Ionic Character
- Non-ionic
- Health and Safety
Chemguard S-550-100 High Performance Amphoteric Fluorosurfactant is not recommended for use in applications involving repeated exposure to skin contact, inhalation, or ingestion.. Chemguard fluorosurfactants are based on the telomer synthesis process and are composed of chains of six fluorinated carbons. The telomer process produces no perfluorooctane sulfonate (PFOS), and C6 materials do not break down to yield perfluorooctanoic acid (PFOA).
- Diluent Composition
- None, non-VOC
- Shelf Life Storage
Store Chemguard S-550-100 High Performance Amphoteric Fluorosurfactant between 10 °C and 50 °C (50 °F and 122 °F). If the agent is frozen or if solids separate, warm the agent to room temperature before use. The properties and performance of Chemguard S-550-100 are not affected by freezing or thawing. Shelf life is two years if the agent is stored and tightly sealed in the original container at temperatures below 50 °C (122 °F).
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Percent Actives | 100 | % |
| Aqueous Surface Tension in DI Water (25°C, 0.001% Actives) | 30 | mN/m |
| pH | 4.5 - 7.5 | — |
| Aqueous Surface Tension in DI Water (25°C, 0.01% Actives) | 20 | mN/m |
| Aqueous Surface Tension in DI Water (25°C, 0.1% Actives) | 18 | mN/m |
| Freezing Point | 6 | °C |
| Density (25°C) | 1.4 | g/ml |
| Viscosity | 35 | cP |
| Flash Point (Pensky-Martens, Closed Cup) | min. 70 | °C |
| Refractive Index (25°C) | 1.3900 - 1.3960 | — |
