To catalogue
Braskem America LDF2023
- Chemical Family
- PolyethylenesPolyolefins
Braskem LDF2023 is a non-additivated low density polyethylene (LDPE). It has good optical properties and excellent processability.\nFor more information regarding REACH, please visit Braskem's REACH site
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Printing & Packaging — Packaging
- Food & Beverage Packaging
Product Families
Plastics — Basic Thermoplastics
- Polyolefins
Other characteristics
- Polymer Name
- Low Density Polyethylene (LDPE)
- Melt Flow Index
- 2.0 g/10 min
- Processing Methods
Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion
- Note
Film properties tested with a monolayer 50 µm thickness blown film, blow up ratio: 2.8, die gap: 1.8 mm. MD=Machine direction, TD= Transversal direction. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee.
- Markets
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Carbon Black-free
- Dye Free
- Not Listed In California Proposition 65
- Pigment-free
- Material Features
- Good Optical Properties
- Good Processability
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- EINECS (EU)
- ENCS (Japan)
- IECSC (China)
- KECI (Korea)
- NZIoC (New Zealand)
- PICCS (Phillipines)
- Certifications and Compliance
- EC No. 2023/2006
- Regulation (EU) No. 10/2011 (PIM)
- Regulation (EU) No. 1935/2004
- Regulation (EU) No. 2023/1627
- Plastics and Elastomers End Uses
- Bags
- Cast Films
- Film
- Sacks
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Blown Film Extrusion
- Cast Film Extrusion
- Extrusion
- Film Extrusion
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dart Drop Impact | 110 | gF | ASTM 1709/A |
| Elmendorf Tear Strength (TD) | 340 | MPa | ASTM 1922 |
| Haze | 4.9 | — | — |
| Tensile Strength at Break MD | 19 | MPa | ASTM D-882 |
| Tensile Strength at Break TD | 15 | MPa | ASTM D-882 |
| Strain at Break (MD) | 310 | % | ASTM D 882 |
| Strain at Break (TD) | 585 | % | ASTM D 882 |
Table 2 of 2
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D 792 |
| Melt Flow Rate (190°C/2.16Kg) | 2 | g/10 min | ASTM D 1238 |
