To catalogue
Polymer Resources Ltd. PRL PC/TP-GP3
- Chemical Family
- Polycarbonate (PC), PolyestersPolycarbonate (PC)Polyesters
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
Healthcare & Pharma — Medical
- Medical Devices & Assemblies
Product Families
Plastics — Engineering & Specialty Polymers
- Blends & Alloys
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Density
- 1240.0 - 1240.0 kg/m³
- Polymer Name
- PC/Polyester Alloy
- Processing Methods
- Injection Molding
- Markets
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Additives
- Impact Modifier
- Features
- Chemical Resistant
- General Purpose
- Impact Modified
- Low Temperature Impact Resistance
- Ultra High Impact Resistance
- Availability
- North America
- Technology
- Composite Materials
- Plastics
- Processing Method
- Injection Molding
- Additives Included
- Impact Modifier
- Material Features
- Chemical Resistant
- High Impact Resistance
- Impact Modified
- Low Temperature Impact Resistance
- Country Availability
- Canada
- Mexico
- USA
- Agency Ratings
- RoHS Compliant
- Certifications and Compliance
- RoHS Compliant
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Appliances
- General Purpose
- Lenses
- Medical Devices
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.24 | — | ASTM D792 |
| Melt Mass Flow Rate (at 265°C, 2.16 kg) | 6.0 - 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage (at 0.125 in, Flow) | 0.013 - 0.018 | in/in | ASTM D955 |
| Specific Gravity | 1.24 | — | ASTM D792 |
Table 2 of 5
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (at Yield, 0.125 in) | 6700 | psi | ASTM D638 |
| Tensile Strength (at Break, 0.125 in) | 6400 | psi | ASTM D638 |
| Flexural Modulus (at 0.125 in) | 260000 | psi | ASTM D790 |
| Flexural Strength (at Break, 0.125 in) | 9600 | psi | ASTM D790 |
Table 3 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed) | 240 | °F | ASTM D648 |
| Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed) | 170 | °F | ASTM D648 |
Table 4 of 5
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature | 220 - 230 | °F |
| Drying Time | 4.0 - 6.0 | hr |
| Front Temperature | 460 - 500 | °F |
| Middle Temperature | 450 - 480 | °F |
| Mold Temperature | 120 - 180 | °F |
| Maximum Drying Time | 8 | hr |
| Rear Temperature | 440 - 470 | °F |
| Processing Temperature (Melt) | 460 - 500 | °F |
Table 5 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Impact Strength (at -40°F, 0.125 in, Notched Izod) | 9 | ft·lb/in | ASTM D256 |
| Impact Strength (at 73°F, 0.125 in, Notched Izod) | 15 | ft·lb/in | ASTM D256 |
| Gardner Impact Strength (at 0.125 in) | min. 320 | in·lb | ASTM D3029 |
