To catalogue
Polymer Resources Ltd. PRL PPX-FR1
- Chemical Family
- Styrenics
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
Healthcare & Pharma — Medical
- Medical Devices & Assemblies
Product Families
Plastics — Engineering & Specialty Polymers
- Blends & Alloys
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Density
- 1080.0 - 1080.0 kg/m³
- Polymer Name
- PPO/PS Alloy
- Processing Methods
- Injection Molding
- Markets
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Additives
- Flame Retardant
- Features
- Bromine Free
- Chlorine Free
- Flame Retardant
- Medium Heat Resistance
- Self Extinguishing
- Availability
- North America
- Technology
- Composite Materials
- Plastics
- Labeling Claims
- Bromine-free
- Chlorine-free
- Processing Method
- Injection Molding
- Quality Standards
- UL Yellow Card (E113219)
- Additives Included
- Flame Retardant
- Material Features
- Flame Retardant
- Heat Resistance
- Self Extinguishing
- UL Flame Rated
- Country Availability
- Canada
- Mexico
- USA
- Agency Ratings
- RoHS Compliant
- Certifications and Compliance
- RoHS Compliant
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Appliances
- Medical Devices
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 8
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.08 | — | ASTM D792 |
| Melt Mass Flow Rate (at 250°C, 11.6 kg) | 25 - 50 | g/10 min | ASTM D1238 |
| Molding Shrinkage (at 0.125 in, Flow) | 5.0E-3 to 7.0E-3 | in/in | ASTM D955 |
| Specific Gravity | 1.08 | — | ASTM D792 |
Table 2 of 8
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (at 0.125 in) | 350000 | psi | ASTM D638 |
| Tensile Strength (at Yield, 0.125 in) | 8000 | psi | ASTM D638 |
| Tensile Strength (at Break, 0.125 in) | 7000 | psi | ASTM D638 |
| Tensile Elongation (at Yield, 0.125 in) | 3.5 | % | ASTM D638 |
| Tensile Elongation (at Break, 0.125 in) | 9 | % | ASTM D638 |
| Flexural Modulus (at 0.125 in) | 330000 | psi | ASTM D790 |
| Flexural Strength (at 0.125 in) | 13000 | psi | ASTM D790 |
Table 3 of 8
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed) | 190 | °F | ASTM D648 |
| Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed) | 180 | °F | ASTM D648 |
| Relative Thermal Index Electrical Property (at 0.06 in) | 230 | °F | UL 746 |
| Relative Thermal Index Electrical Property (at 0.07 in) | 230 | °F | UL 746 |
| Relative Thermal Index Electrical Property (at 0.12 in) | 230 | °F | UL 746 |
| Relative Thermal Index Impact Property (at 0.06 in) | 203 | °F | UL 746 |
| Relative Thermal Index Impact Property (at 0.07 in) | 203 | °F | UL 746 |
| Relative Thermal Index Impact Property (at 0.12 in) | 203 | °F | UL 746 |
| Relative Thermal Index Strength Property (at 0.06 in) | 230 | °F | UL 746 |
| Relative Thermal Index Strength Property (at 0.07 in) | 230 | °F | UL 746 |
| Relative Thermal Index Strength Property (at 0.12 in) | 230 | °F | UL 746 |
| Vicat Softening Temperature | 218 | °F | ASTM D1525 ² |
Table 4 of 8
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity | 1.0e+17 | ohms·cm | ASTM D257 |
| Dielectric Strength (at 0.0591 in) | 560 | V/mil | ASTM D149 |
| Comparative Tracking Index (at 0.0591 in) | PLC 2 | — | UL 746 |
| High Amp Arc Ignition (at 0.06 in) | PLC 1 | — | UL 746 |
| High Amp Arc Ignition (at 0.07 in) | PLC 1 | — | UL 746 |
| High Amp Arc Ignition (at 0.12 in) | PLC 1 | — | UL 746 |
| High Voltage Arc Tracking Rate (at 0.0591 in) | PLC 3 | — | UL 746 |
| Hot Wire Ignition (at 0.06 in) | PLC 0 | — | UL 746 |
| Hot Wire Ignition (at 0.07 in) | PLC 0 | — | UL 746 |
| Hot Wire Ignition (at 0.12 in) | PLC 0 | — | UL 746 |
Table 5 of 8
3 rows| Characteristic | Value | Method |
|---|---|---|
| Flame Rating (at 0.06 in) | V-0 | UL 94 |
| Flame Rating (at 0.07 in) | V-0 | UL 94 |
| Flame Rating (at 0.12 in) | V-0 | UL 94 |
Table 6 of 8
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature | 160 - 180 | °F |
| Drying Time | 3.0 - 4.0 | hr |
| Front Temperature | 460 - 530 | °F |
| Middle Temperature | 440 - 520 | °F |
| Mold Temperature | 130 - 170 | °F |
| Rear Temperature | 420 - 510 | °F |
| Maximum Drying Time | 8 | hr |
| Processing Temperature (Melt) | 475 - 525 | °F |
Table 7 of 8
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Impact Strength (at 73°F, Notched Charpy) | 9 | ft·lb/in² | ISO 179 |
| Impact Strength (at 73°F, Notched Izod) | 9 | ft·lb/in² | ISO 180/1A |
| Impact Strength (at 73°F, 0.125 in, Unnotched Izod) | 13 | ft·lb/in | ASTM D4812 |
| Gardner Impact Strength (at 0.125 in) | 150 | in·lb | ASTM D3029 |
| Impact Strength (at -22°F, 0.125 in, Notched Izod) | 1.5 | ft·lb/in | ASTM D256 |
| Impact Strength (at 73°F, 0.125 in, Notched Izod) | 5 | ft·lb/in | ASTM D256 |
Table 8 of 8
1 row| Characteristic | Value | Method |
|---|---|---|
| Rockwell Hardness (R-Scale) | 118 | ASTM D785 |
