To catalogue
Polymer Resources Ltd. PRL PPX-G5
- Chemical Family
- Styrenics
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
Healthcare & Pharma — Medical
- Medical Devices & Assemblies
Product Families
Plastics — Engineering & Specialty Polymers
- Blends & Alloys
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Density
- 1100.0 - 1100.0 kg/m³
- Polymer Name
- PPO/PS Alloy
- Processing Methods
- Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Features
- Hydrolytically Stable
- Low to No Water Absorption
- Medium Heat Resistance
- Availability
- North America
- Technology
- Composite Materials
- Plastics
- Fillers Included
- Glass Fiber
- Processing Method
- Injection Molding
- Material Features
- Heat Resistance
- High Hydrolytic Stability
- Low Water Absorption
- Country Availability
- Canada
- Mexico
- USA
- Filler/Reinforcement
- Filler
- Glass Fiber
- Reinforcement
- 5% Filler by Weight
- Agency Ratings
- RoHS Compliant
- Certifications and Compliance
- RoHS Compliant
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Appliances
- Medical Devices
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.1 | — | ASTM D792 |
| Melt Mass Flow Rate (at 250°C, 11.6 kg) | 2.0 - 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage (at 0.125 in, Flow) | 3.0E-3 to 6.0E-3 | in/in | ASTM D955 |
| Specific Gravity | 1.1 | — | ASTM D792 |
Table 2 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (at Yield, 0.125 in) | 9250 | psi | ASTM D638 |
| Tensile Strength (at Break, 0.125 in) | 9000 | psi | ASTM D638 |
| Tensile Elongation (at Break, 0.125 in) | 6 | % | ASTM D638 |
| Flexural Modulus (at 0.125 in) | 425000 | psi | ASTM D790 |
| Flexural Strength (at 0.125 in) | 14000 | psi | ASTM D790 |
Table 3 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed) | 260 | °F | ASTM D648 |
| Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed) | 250 | °F | ASTM D648 |
Table 4 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity | 10000000000000000 | ohms·cm | ASTM D257 |
Table 5 of 6
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature | 220 - 230 | °F |
| Drying Time | 3.0 - 4.0 | hr |
| Front Temperature | 540 - 600 | °F |
| Middle Temperature | 520 - 590 | °F |
| Mold Temperature | 160 - 220 | °F |
| Maximum Drying Time | 8 | hr |
| Rear Temperature | 500 - 580 | °F |
| Processing Temperature (Melt) | 550 - 600 | °F |
Table 6 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Impact Strength (at -22°F, Notched Izod) | 2 | ft·lb/in | ASTM D256 |
| Impact Strength (at 73°F, 0.125 in, Notched Izod) | 3 | ft·lb/in | ASTM D256 |
