NCP Coatings N-8584 - Black Water Reducible Primer
NCP Coatings N-8584 - Black Water Reducible Primer is a low VOC, HAPS Free, high performance, water reducible primer exhibiting fast curing characteristics and can be applied by spray application. This product is designed to be applied to mild steel and cast steel substrates where excellent early moisture and corrosion resistance is required.
Product families
Applications
- Primers & Lacquers
Product Families
- Primers & Sealers
Other characteristics
- Features
Corrosion Resistant, Fast Curing, High Performance, Moisture Resistant, Water Reducing
- Product Type
- Primer
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Iron, Metal, Steel
- Color
- Black
- Markets
- Printing & Packaging
- Technology
- Ready-to-Use Products
- Labeling Claims
- HAPs-free
- Low VOC
- Application Methods
- Spray
- Surface Preparation
Do not apply if the application surface temperature is below 45°F (7°C) or above 110°F (43°C), or if the surface temperature is within 5°F of the dew point. It is highly recommended that sound practices as set forth by SSPC or NACE be followed when preparing a substrate for painting. At a minimum the surface should be clean of all grease, dirt, oil, rust and foreign material that would be detrimental to proper adhesion and desired performance of the coating system being applied.
- Ready to Use Product Features
- Corrosion Resistant
- Fast Curing
- High Performance
- Moisture Resistant
- Water Reducing
Technical data
Table 1 of 1
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Gloss (60º) | 5 - 20 | — | ASTM D523-08 |
| Volume Solids | 40 - 46 | % | — |
| Weight Solids | 60 - 69 | % | — |
| Weight Per Gallon | 12.20 - 12.7 | lbs/gallon | — |
| Theoretical Coverage (1 mil dft) | 702.0 | sq ft/gal | — |
| VOC | 1.68 | lbs. / gal. | — |
| Recommended Film Thickness (DFT) | 2.0 - 2.5 | mils | ASTM D4138-07a/D7091-12 |
| Viscosity (#4 Zahn cup) | 55 - 65 | seconds | — |
| Substrate Tested | SAE 1010 Cold Rolled Steel for all panels tested. | — | — |
| Salt Spray (2 mils. d.f.t.) | Passes 336 | hours | ASTM B117 |
| 96 Hours Water Immersion (No blistering, rusting or color change. Adhesion > 2A.) | Pass | — | ASTM D870-09 |
| Alkali Resistance (1 minute Boiling Alkali immersion with no blistering, rusting or change in film hardness.) | Passes | — | ASTM D1308-02 |
