SuperSeal™ 20WB
- Chemical Family
- Acrylics & Acrylates
SuperSeal™ 20WB is a water-based acrylic sealer for general everyday use. This product may be used when a solvent-based sealer cannot due to safety or flammability concerns. It may be applied to almost any surface: concrete, tile, cementitious overlays and much more. It can be applied to bare concrete without the use of a primer, or sprayed on concrete or concrete block, exhibiting excellent water resistance and resistance to water blushing.
Other characteristics
- Brand
- SuperSeal
- Features
Anti-Blocking, Chemical Resistant, Durable, Fast Drying, Good Stain Resistance, Good Weather Stability, Low Odor, Low VOC, Matte Finish, Non Flame Retardant, Water Resistant; Water based acrylic; Matte finish; Applied milky white, dries clear
- Product Type
- Sealer
- Application Method
- Roller, Spray
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- First Aid
In case of skin contact, wash thoroughly with soap and water. For eye contact, flush immediately with plenty of water for at least 15 minutes. For respiratory problems, remove person to fresh air. Contact Physician Immediately. Wash clothing before re-use.Consult Material Safety Data Sheet for More Information KEEP OUT OF REACH OF CHILDREN KEEP CONTAINERS TIGHTLY CLOSED.
- PACKAGING
SuperSeal™ 20WB is available in one-gallon (3.8 L) and five-gallon (18.925 L) containers and fifty-five gallon (208.175 L) drums.
- Shelf LIfe
- 1 year in original unopened container.
- Advantages
- Good Working Time
- No Odor
- Low VOCs
- Low Water Pickup
- Early Block Resistance
- Quick Drying
- Good Exterior Weatherability
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 285.0 | cps | — |
| pH | 8.2 - 8.7 | — | ASTM E-70 |
| Consistency | Water | — | — |
| Tack-free time (Substrate Temperature 70°F+, To Touch) To Recoat | 30.0 | mins | — |
| Tack-free time (Substrate Temperature 70°F+, To Recoat) | 1.5 | hrs | — |
| Film Clarity | Clear | — | — |
| Adhesion (On glass) | 225 - 350 | g/mil | — |
| Abrasion Resistance | 185.0 | g/mil | ASTM D-658-44 |
