CSL Silicones CSL841 Non Curing Silicone Grease Compound
- Chemical Family
- Silicones
CSL Silicones CSL841 Non Curing Silicone Grease Compound is a non-curing, general-purpose, dielectric silicone grease compound. It is a grease-like material that is ideally suited for lubricating, waterproofing, corrosion protection, mold release, and insulating. It is moisture-resistant and retains its consistency and properties over a temperature range of -76°F to 392°F. CSL841 is a non-toxic, non-melting, highly water repellant silicone grease resistant to oxidation. Practically nonvolatile, CSL841 is also odorless, resistant to a wide range of chemicals, and has excellent dielectric properties. CSL841 has excellent thermal and oxidative stability and low surface tension.
Properties
- Physical Form
- Paste
Product families
Applications
- Electrical & Electronic Systems
- Automotive Electronics
- Building Wires & Power Cables
Product Families
- Greases
Other characteristics
- Features
Chemical Resistant, Corrosion Resistant, Excellent Dielectric Properties, Excellent Lubricity, Excellent Moisture Resistance, General Purpose, Good Mold Release, Good Thermal Stability, Non-Toxic, Odorless, Oxidation Resistant, Thixotropic, Water Resistant; Non-curing compound; Highly water repellant; Resistant to oxidation; Low bleed; Retains consistency over a temperature range; Easy rework; Non-toxic
- Product Type
- Grease
- Compatible Substrates & Surfaces
- Elastomers & Rubbers, Plastics
- Type
- Non-Curing Compound
- Color
- Transparent
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Storage
CSL841, when stored in original, unopened container in dry, shaded conditions, away from sources of heat or ignition, and stored at or below 32°C (90°F), has a shelf life of sixty (60) months (5 years) from date of manufacture.
- Benefits
- Oxidation resistant
- Non-corrosive
- Highly water repellent
- Withstand temperature extremes
- Chemically resistant
- PACKAGING
CSL841 is available in 80mL tubes, 1 US gallon cans, 19L (5 US gallon) pails and 189L (50 US gallon) drums.
- Appearance
- Smooth, Translucent, Thixotropic Paste
- Application
CSL841 compound can be easily applied by brushing or wiping. For thin coatings the compound can be applied as a solvent dispersion. CSL841 is insoluble in water and alcohols. The suitability of a particular solvent should be based on testing prior to use.
- Technology
- Ready-to-Use Products
- Typical Uses
General Purpose - Waterproofing, corrosion protection, mold release, insulating, lubricant for plastic and rubber.; Automotive - Battery terminal connections, spark plug ends and caps. Not recommended for high friction metal to metal lubrication.; Electrical - Provides moisture resistance on electrical wiring, acts as a lubricant for power cable connections and as an oxide inhibitor on electrical contacts.
- Base Oil
- Silicone
- Labeling Claims
- Non-Toxic
- Safety Precautions
CSL841 may cause slight discomfort if accidentally rubbed into the eyes. It is essentially non-irritating to the skin. See Safety Data Sheet (SDS) available on this product.. All work involving the application and use of this product should be performed in compliance with all relevant national, Health, Safety & Environmental standards & regulations.
- Surface Preparation
- All surfaces should be clean and dry.
- Certifications and Compliance
- EcoLogo
- Ready to Use Product Features
- Chemical Resistant
- Corrosion Resistant
- Excellent Dielectric Properties
- Excellent Lubricity
- Excellent Moisture Resistance
- General Purpose
- Good Mold Release
- Good Thermal Stability
- Compatible Substrates and Surfaces
- Elastomers & Rubbers
- Plastics
Technical data
Table 1 of 2
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1.03 | — | — |
| Unworked Penetration (1/100mm) | 234.0 | — | ASTM D217 |
| Worked Penetration (1/100mm, 60 Strokes) | 245.0 | — | ASTM D217 |
| Worked Penetration (1/100mm, 200 Strokes) | 247.0 | — | ASTM D217 |
| Oil Separation (Bleed After 24h, 100°C, Weight) | 1.28 | % | ASTM D1742 |
| Oil Separation (Bleed After 24h, 200°C, Weight) | 7.35 | % | ASTM D1742 |
| Evaporation (After 24h, 100°C, Weight) | 0.84 | % | ASTM D972 |
| Evaporation (After 24h, 200°C, Weight) | 3.14 | % | ASTM D972 |
| Dielectric Strength | 96.01 | V/mil | ASTM D149 |
| Volume Resistivity | 4.1 × 10⁹ | ohms.cm | ASTM D257 |
| Dissipation Factor (100Hz) | 0.44 | — | ASTM D150 |
| Dissipation Constant (100Hz) | 5.75 | — | ASTM D150 |
Table 2 of 2
1 row| Characteristic | Value | Unit |
|---|---|---|
| Temperature Stabilty | -76 to 392 | °F |
