CSL Silicones CSL942 Multi-Surface Primer
- Chemical Family
- Silicones
CSL Silicones CSL942 Multi-Surface Primer is a one-component silicone resin in solvent designed to promote the adhesion of silicone sealants to multiple surfaces and substrates. CSL942 is designed to impart optimum silicone sealant adhesion to porous surfaces i.e. concrete, brick, wood, many plastics and metals such as aluminum, steel, copper, brass, etc.
Properties
- Physical Form
- Liquid
Product families
Applications
- Paints & Coatings — Other Paints & Coatings Applications
- Wood Coatings & Finishes
Product Families
- Primers & Sealers
Other characteristics
- Features
- Excellent Substrate Adhesion
- Suitable for multiple surfaces and substrates.
- Easy to apply by spray or brush.
- Suitable for use with all CSL silicone sealants.
- Product Type
- 1K (1 component) Coating, Primer
- 1K (1 component) Coating
- Primer
- Application Method
- Brush, Spray, Wipe
- Compatible Substrates & Surfaces
Aluminum, Brass, Brick, Concrete, Copper, Metal, Plastics, Steel, Wood
- Type
- Dilute Solution of Reactive Materials in Solvent
- Color
- Amber
- Markets
- Paints & Coatings
- Storage
CSL942 Primer should always have the container cap replaced immediately after use. Containers should be kept tightly sealed when not in use.. CSL942, when stored in original, unopened container in dry, shaded conditions, away from sources of heat or ignition, and stored at or below 32°C (90°F), has a shelf life of 12 months from date of manufacture.
- PACKAGING
- CSL942 is supplied in 500ml (1.06 pint).
- Appearance
- Liquid
- Application
For best results, the following steps should be taken:; Thoroughly clean and degrease the surface as above.; After the surface has dried, apply a coat of CSL942 primer by wiping, brushing, or spraying. Avoid brushing with nylon or synthetic bristles. Only natural bristle is recommended.; A thin film of primer will normally give the best adhesion.; At normal temperature and humidity CSL942 should be allowed to air dry for 5 - 10 minutes. Under colder conditions drying time may increase to 25 minutes.; Apply CSL RTV Adhesive/Sealant.
- Technology
- Ready-to-Use Products
- Typical Uses
Designed to impart optimum silicone adhesion to porous surfaces such as concrete, brick, wood, many plastics and metals such as aluminum, steel, copper, brass, etc.
- Application Methods
- Brush
- Spray
- Wipe
- Safety Precautions
CSL942 is flammable. Keep away from open flame and heat. Use with adequate ventilation and avoid prolonged breathing of vapors. Prolonged or repeated skin contact might cause irritation. In the event of eye contact flush well with water and consult a physician.. All work involving the application and use of this product should be performed in compliance with all relevant national, Health, Safety & Environmental standards & regulations.
- Surface Preparation
Thoroughly clean and degrease the surface by using solvent and a clean lint-free cloth.
- Certifications and Compliance
- EcoLogo
- ISO 9001
- Ready to Use Product Features
- Excellent Substrate Adhesion
- Compatible Substrates and Surfaces
- Aluminum
- Brass
- Brick
- Concrete
- Copper
- Metal
- Plastics
- Steel
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity (As Supplied) | 0.8 | — |
| Flash Point (As Supplied) | 10.0 | °F |
