NuGenTec AquaKlean EF53
NuGenTec AquaKlean EF53 is a mildly alkaline liquid cleaner with moderate foaming tendencies for use in tank applications. The non-silicated and non-caustic formula will not sludge or scale-up. The mildly alkaline formula allows AquaKlean EF53 to be used as a multi-metal cleaner. Other acceptable materials include: plastics, ceramics and glass. May be used in solvent replacement tanks with hand brushing operations. Contains sodium nitrite for flash rust protection. It was formulated as a heavy duty cleaner to provide improved removal of particulates and organics while providing reduced residues, and fast rinsing.
Properties
- Physical Form
- Liquid
Product families
- Industrial Cleaners
Other characteristics
- Features
Biodegradable, Degreasing, Effective Soil Removal, Heavy Duty, Non Corrosive
- Product Type
- Alkaline Cleaners, Cleaner, Degreasers
- Alkaline Cleaners
- Cleaner
- Degreasers
- Application Area
- Tanks
- Certifications & Compliance
- California Proposition 65, ISO 14001, ISO 9001
- Compatible Substrates & Surfaces
Aluminum, Brass, Ceramic, Copper, Glass, Metal, Plastics
- Safety
Please make sure you have read and understand the product label and MSDS before using this product. Avoid breathing vapors, spray or mists. Use only with adequate ventilation. Wash thoroughly after handling. Observe label precautions.
- Markets
- HI&I Care
- Storage
Keep out of direct sunlight. Keep from freezing. Store between 40-120 °F.
- Compliance
- AquaKlean EF53 Meets MIL-PRF85704C, Type II.
- Product is California Prop 65 compliant.
- Technology
- Ready-to-Use Products
- Packaging Type
- Tanks
- Totes (IBC)
- Labeling Claims
- Biodegradable
- Chelate-free
- Non-Corrosive
- Phosphate-free
- Silicate-free
- VOC-free
- Benefits
Multi-metal spray and tank cleaner and degreaser; Built in corrosion (Flash Rust) inhibitor; Moderate foaming tendency; Removes inks, polishing and buffing compounds, grease, oils, fingerprints, drawing compounds, and metalworking fluids Features
- Application Methods
- Brush
- Spray
- Use Direction
Effective at ambient temperatures. However, it is normally used at 1 to 10% by volume of water at 120 to 165°F for 5 seconds to 5 minutes. The parameters can vary due to the type and extent of soils to be removed. Temperatures may be increase slightly for shorter time cycles. Not safe on magnesium. Test for discoloration on cuprous alloys.
- Chemical Inventories
- TSCA (USA)
- Certifications and Compliance
- California Proposition 65
- ISO 14001
- ISO 9001
- Ready to Use Product Features
- Biodegradable
- Degreasing
- Effective Soil Removal
- Heavy Duty
- Non Corrosive
- Compatible Substrates and Surfaces
- Aluminum
- Brass
- Ceramic
- Copper
- Glass
- Metal
- Plastics
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| pH (Concentrate) | 9.8 | — |
| pH (At 5% bv) | 8.8 | — |
| Bulk Density | 8.7 | lbs/gal |
| Flash Point | None | — |
| Chelates | None | — |
| VOC (Concentrate) | 0.0 | g/l |
| Biodegradable | Yes | — |
| Corrosive | No | — |
| Phosphated | No | — |
