Mean Klean™ Concrete Degreaser
Mean Klean™ Concrete Degreaser is a high-quality, heavy-duty degreaser and soil remover. The concentrated formula can be diluted with water to provide an economical, effective degreaser for many different surfaces. NewLook Concrete Degreaser removes grease, oil, transmission fluid, adhesive, and other greasy areas from concrete and masonry surfaces. When used according to directions, NewLook Concrete Degreaser effectively cleans concrete surfaces in preparation for staining with NewLook International Concrete Color Stains™ or other penetrating concrete color stains.
Properties
- Physical Form
- Liquid
Product families
Applications
- Surface Care
Product Families
- Commercial Cleaners
Other characteristics
- Brand
- Mean Klean
- Features
Degreasing, Good Penetration, Long Term Protection, Water-based
- Product Type
- Cleaner, Degreasers, Stain Removers
- Cleaner
- Degreasers
- Stain Removers
- Application Area
- Floor, Hard Surfaces
- Floor
- Hard Surfaces
- Compatible Substrates & Surfaces
- Concrete
- Caution
Keep away from children and animals. Before using or handling, read the MSDS and product instructions. Do not consume. Avoid contact with eyes and skin. Wear rubber gloves, aprons and safety eye goggles. Use good hygiene when handling this product. It is recommended that you wash and bathe after each use.
- Markets
- HI&I Care
- Storage
Store in a safe, dry place.; Keep containers tightly sealed.; DO not allow product to freeze.; Store in original container in areas inaccessible to children and pets.; Do not reuse empty container. Rinse empty container and replace cap before discarding.
- Precaution
Do not use on painted or stained surfaces, aluminum, chrome, copper, brass, and other alkaline-sensitive surfaces.; First test in an inconspicuous area.; May dissolve sealers and other protective coatings.; Saturate plants, shrubs, and grasses before, during, and after use.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Biodegradable
- Environmentally Friendly
- Non-Corrosive
- Non-Flammable
- Non-Hazardous
- Non-Toxic
- VOC-free
- Uses and Benefits
Use Concrete Degreaser on concrete and other durable hard surfaces to remove grease, oil, adhesives, and other heavily soiled areas.. Concrete Degreaser is especially useful in preparing concrete surfaces for NewLook Concrete Color Stains.
- Application Methods
- Wipe
- Use Direction
Scrape off as much of soiling mass (e.g. heavy grease deposits or excessive adhesive) from surface as possible before cleaning.; Dilute according to Dilution Rations listed below.; Apply NewLook Concrete Degreaser with a NewLook Applicator; Brush™, mop, pressure washer, or pump sprayer.; Allow dwell time of 3 to 5 minutes for heavy soil.; Agitate with brush or mop; do not allow Degreaser to dry.; Rinse thoroughly with water.; Using a pressure washer where appropriate will increase the effectiveness of cleaning and rinsing.; Repeat all the steps above as necessary.
- Chemical Inventories
- TSCA (USA)
