EasyStrip 1000™
EasyStrip 1000™ is a low VOC, water-based concrete coating and paint removed that will effectively lift most sealers, acrylics, non-acid stains, non-lead based paints, urethanes, lacquers, latex, and varnish. EasyStrip 1000 can be used in preparation for NewLook Concrete Color Stains™ or any otherdecorativ e concrete product. Not recommended for use on epoxies or polyureas—Use NewLook EasyStrip 2000 for these coatings. Recommended for use onarchitectural surfaces such as concrete, brick, masonry, wood and where coatings and non-lead based paints are present or in any area where worker safety or damages to delicate equipment may be a concern. NewLook EasyStrip 1000 contains no TAPs or HAPs, offers easy cleanup using NewLook Concrete Degreaser™ and water.
Properties
- Physical Form
- Liquid
Product families
Applications
- Surface Care
Product Families
- Commercial Cleaners
Other characteristics
- Brand
- EasyStrip 1000
- Features
Degreasing, Fast Acting, High Durability, Improved Adhesion, Low Odor, Water-based
- Product Type
- Cleaner, Degreasers, Stain Removers
- Cleaner
- Degreasers
- Stain Removers
- Application Area
- Floor
- Compatible Substrates & Surfaces
- Concrete
- Caution
Keep away from children and animals. Before using or handling, read the msds and product instructions. Do not collect and/or store removed coating and stripped waste residue in metal containers. Only use plastic containers. Do not consume. Avoid contact with eyes and skin. Wear rubber gloves, aprons and safety eye goggles. Use good hygiene when handling this product. It is recommended that you wash and bathe after each use.
- Markets
- HI&I Care
- Appearance
- Yellow Gelled Emulsion
- Shelf LIfe
- 24 Months
- Limitations
Surface temperature should be between 50°F (10°C) and rising and 90°F (35°C) and cooling.; EasyStrip 1000 performs effectively at lower temperatures, but the dwell time must be increased.; Above 85°F (30°C), EasyStrip may need to be over-applied, re-applied, or covered with plastic to prevent drying time during dwell time.; EasyStrip 1000 will not strip Novalac Epoxies.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Biodegradable
- Environmentally Friendly
- Non-Corrosive
- Non-Flammable
- Non-Hazardous
- Non-Toxic
- VOC-free
- Recommended Usage
Concrete sealer and coating removal; Masonry surfaces; Elastomeric coating removal; Graffiti on porous surfaces; Any non-lead based architectural coating removal; Any area where abrasive blasting is not an option due to environmental,; economic, dust, or surface damage concerns
- Application Methods
- Wipe
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Boiling Point | 212.0 | °F |
| Flash Point | min. 212 | °F |
| Freezing Point | 32.0 | °F |
| pH | 9 - 11 | — |
| Specific Gravity | 1.03 | — |
| Viscosity | 6000 - 12000 | Cps |
| VOC | 440.0 | g/l |
