NANOMYTE® BE-56E (NMC811)
- Chemical Family
- Oxides
NANOMYTE® BE-56E (NMC811) is a Lithium Nickel Manganese Cobalt Oxide (NMC811) electrode sheets
Properties
- Physical Form
- Sheets
Product families
Applications
- Batteries
Product Families
- Cathode Materials
Other characteristics
- Brand
- NANOMYTE
- End Uses
- Lithium-Ion, Lithium-Ion Batteries
- Functions
- Cathode Material
- Markets
- Electrical & Electronics
- Battery Type
- Lithium-Ion
- Technology
- Industrial Additives & Materials
- Packaging Type
- Bulk
- ChemicalFormula
- LiNi0.8Mn0.1Co0.1O2
- HIGHLIGHTS
Cast Electrode Tapes for Lithium ion Batteries NEI offers a variety of cathode and anode electrode sheets suitable for a wide range of applications. Standard electrode sheets are 5 inches x 10 inches (127 mm x 254 mm) and cast either single sided or double sided on aluminum (cathode) or copper foil (anode) current collectors. NEI also offers custom tailored solutions for customers with unique specification requirements. Our cast electrodes can be modified to accommodate different active material loadings, coating thickness, and binder type / content upon request.
- Available Quantities
NEI's standard electrode sheets are available in packages of 2, 5, & 10 sheets. Bulk quantities are also available.
- Industrial Additives End Use
- Lithium-Ion Batteries
- Industrial Additives Features
- Long Cycle Life
- Low Temperature Handling Properties
- Electrode Tape Characteristics
Standard Tape Composition:; *Specifications can be modified upon request to accommodate different active material loadings, coating thickness, & capacity.
- Industrial Additives Functions
- Cathode Material
- Precautions for Safe Storage and Handling
Personal protective equipment should be used at all times. Avoid contact with eyes and skin. Ensure adequate ventilation and avoid inhalation of dusts. Wash hands thoroughly after handling. Store in a dry and sealed pouch or under inert atmosphere, away from heat. Avoid moisture.
Technical data
Table 1 of 4
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Active Material Loading | 10 (± 5%) | mg/cm² (per side) |
| Areal Capacity | 2 (± 5%) | mAh/cm² (per side) |
| Current Collector Thickness | 16 | μm |
| Sheet Size | 5 x 10 (127 x 254) | in*in (mm*mm) |
| Tape Thickness (Excluding Current Collector) | 60 (± 5%) | μm |
Table 2 of 4
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Experimental Capacity (at 3 - 4.3V, 0.1C) | min. 200 | mAh/g |
| Minimum Capacity | 190 | mAh/g |
| Nominal voltage (vs. Li/Li+) | 3.75 | V |
Table 3 of 4
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Average Particle Size (D50) | 10 - 13 | μm |
| Specific Surface Area | 0.2 - 0.5 | m²/g |
Table 4 of 4
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Cutoff Voltage for Discharge (vs. Li/Li+) | 2.7 | V |
| Maximum Charge Current | 1 | C |
| Maximum Charge Voltage (vs. Li/Li+) | 4.5 | V |
| Maximum Discharge Current | 5 | C |
