NANOMYTE® SSE-20
NANOMYTE® SSE-20 is a solvent-based dispersion fluid designed to be compatible with NANOMYTE® SSE-10 LSPS powder (and other sulfide-based solid electrolyte powders). The material is specially formulated to not react with LSPS and contains proprietary additives with an organic lithium salt, which acts as an ionically conductive binder. When SSE-20 is mixed and dispersed with a powder, the material is ready to cast into flexible tapes, providing more options for cell designers to combine with suitable cathode and anode active materials.
Properties
- Physical Form
- Fluid
- Liquid
Product families
Applications
- Batteries
Product Families
- Electrolytes
Other characteristics
- Brand
- NANOMYTE
- End Uses
- Lithium-Ion, Lithium-Ion Batteries
- Synonyms
Aerothene, Dichloromethane, Distillex DS3, Freon 30, Methane Dichloride, Methoklone, Methylene Bichloride, DCM, Methylene Dichloride, Narkotil, Nevolin, Salesthin, Solaesthin, Solmethine
- Functions
- Electrolyte
- Carrier
- Solvent-based
- Markets
- Electrical & Electronics
- Components
Dichloromethane with proprietary additives (polymeric material with organic lithium salt, which acts as an ionically conductive binder)
- Battery Type
- Lithium-Ion
- Technology
- Industrial Additives & Materials
- HIGHLIGHTS
Electrolyte Materials for All Solid State Batteries A long trusted source for custom developed materials used in lithium ion batteries, NEI Corporation is your go to source for commercial and custom solid electrolyte materials. Solid electrolytes conduct lithium ions at room temperature and can potentially replace conventional organic electrolytes, which are flammable and toxic, thereby drastically improving the safety of batteries. NEI is actively involved in producing different solid electrolyte materials of both oxide and sulfide based compositions, as well as polymer based electrolyte materials.
- Available For Purchase
NEI's solid electrolyte materials are available for purchase in lots of 10g, 25g, 50g and 100g (larger quantities also available upon request). All of our materials are made in house & shipped directly to you
- Industrial Additives End Use
- Lithium-Ion Batteries
- Industrial Additives Features
- Long Cycle Life
- Low Temperature Handling Properties
- Industrial Additives Functions
- Electrolyte
- Guidelines
- Surface Preparation
- The current collector surface must be clean, dry, and in sound condition. Before casting the dispersion, remove all oil, grease, dust, dirt and other foreign material by using a solvent such as acetone, and wipe the surface.
- Tape Casting
- The preferred tool for tape casting is doctor blade. Dry tape at room temperature (25 C) – drying times will vary, depending on environmental conditions.
Technical data
Table 1 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature | 20 - 30 | °C |
| Final Solids Content (After Mixing) | approx. 25 | wt% |
Table 2 of 2
1 row| Characteristic | Value |
|---|---|
| Recommended Mixing Ratio (Fluid to Powder, by weight) | 3:1 |
