NANOMYTE® TC-5001
NANOMYTE® TC-5001 is a single component formulation designed to protect zinc plated and galvanized steel from corrosion and degradation. The product is a hard, dense nanocomposite coating that provides barrier protection for the alloy surface. The coating resists scratching and chipping, and strongly adheres to the substrate. The formulation is designed to meet customers’ requirements for film thickness and curing conditions.
Properties
- Physical Form
- Liquid
Product families
- Top Coats
Other characteristics
- Brand
- NANOMYTE
- Features
Excellent Cycle Time, Excellent Substrate Adhesion, Good Scratch Resistance. NANOMYTE® paints and coatings are engineered to be self-healing. That means the paint or coating can repair itself if damaged thus providing active corrosion protection. For example, if a paint layer or coating surface is marred or scratched, it exposes the underlying bare metal to corrosive liquid or gas, which leads to rapid corrosion. Through different self-healing mechanisms, the NANOMYTE coating layers provide additional protection to the metal. NANOMYTE self-healing coatings represent a new class of easy and safe to use coatings that provide exceptional durability.
- Product Type
1K (1 component) Coating, Solventborne Coating, Top Coat; 1K (1 component) Coating; Solventborne Coating; Top Coat
- Application Method
- Brush, Dip Coating, Roll Coater, Spray
- Compatible Substrates & Surfaces
- Galvanized Steel, Metal, Steel
- Curing
Room Temperature Curing (25 °C) Under ambient conditions, a single coat will be dry to the touch in 1-2 hours and cured in 24 hours.. Accelerated Curing (105 °C – 150 °C) Alternatively, the coating can be applied to the surface, dried in ambient air for 10 minutes, and then heated to at least 105 °C for 1 hour. An oven, blow dryer or heat gun may be used (maximum temperature is 150 °C). After heating, coated parts should be allowed to cool before handling. NANOMYTE® TC-5001 will completely wet bare metal surfaces if properly prepared or if primed / painted. Only one coat is required to cover substrates, but multiple coats are allowable. Under ambient conditions, a single coat is 5 – 15 μm (0.2 – 0.6mil) thick and will be dry to the touch in 1-2 hours and cured in 24 hours. Multiple coats can be applied in 10 minute intervals while the previous coat is still tacky. Two to three coats should result in a final coating that is 25 – 40 μm (1 – 1.5 mil) thick.
- Matrix
- Solventborne
- Markets
- Consumer Goods
- Paints & Coatings
- Technology
- Ready-to-Use Products
- Labeling Claims
- Chrome-free
Technical data
Table 1 of 2
1 row| Characteristic | Value | Unit |
|---|---|---|
| Solids Content | 18 - 20 | % |
Table 2 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Coverage | 800 - 1200 | ft²/gallon |
| Curing Temperature | 20 - 150 | °C |
| Recommended Thickness per Coat (Dry mils) | 0.5 - 1.2 | — |
| Recommended Thickness per Coat (Wet mils) | 1.5 - 2.0 | — |
| VOCs | max. 100 | g/L |
