NANOMYTE® SR-Primer
NANOMYTE® SR-Primer can be used to promote adhesion of SR-100, SR-100EC, SuperCN, and SuperAi to plastics such as polycarbonate, polymethylmethacrylate (PMMA), ABS, PC/ABS, PVC and painted surfaces.
Properties
- Physical Form
- Liquid
Product families
- Primers & Sealers
Other characteristics
- Brand
- NANOMYTE
- Product Type
- Primer
- Application Method
- Dip Coating, Flow Coat, Roller, Spin Coat, Spray
- Compatible Substrates & Surfaces
Acrylonitrile Butadiene Styrene (ABS), Coated Surfaces, Plastics, Poly(Methyl Methacrylate) (PMMA), Polycarbonate (PC), Polyvinyl Chloride (PVC)
- Shelf Life
- 18 months
- Technology
- Ready-to-Use Products
- Application Methods
- Dip Coating
- Flow Coat
- Roller
- Spin Coat
- Spray
- Storage and Handling
Precautions for Safe Handling Appropriate personal protective equipment should be used at all times. Avoid contact with eyes, skin and clothing. Provide good ventilation or extraction and avoid prolonged or repeated breathing of vapor. Keep away from heat, sparks, flames and other sources of ignition. Wash hands thoroughly after handling. Transfer only a small amount into a work vessel for use. Conditions for Safe Storage For best coating performance, keep container tightly sealed and store in a dry and cool area. Avoid storage above 40°C / 104°F and contamination with incompatible materials. Keep away from heat, sparks, flames and other sources of ignition. Residual vapors might explode on ignition. Clean Up Clean tools and flush equipment thoroughly with Dowanol PM solvent. Carefully read and follow manufacturer's precautions and directions for use when handling cleaning solvents.
- Application Technique
Ensure surfaces to be coated are clean and dry before application. The primer may be applied by dipping, flowing, spinning, rolling, or spraying.; For dipping, simply immerse the part in the coating solution under good ventilation and slowly take it out. Flash dry in ambient condition.; For spraying, an HVLP spray gun with a nozzle size of <1.0 mm is recommended, and the pressure should be set at approximately 25 to 30 psi.; The primed parts should be dried at elevated temperature before application of top coat.
- Available Formulations
NANOMYTE® SR-Primer is a single component coating, sold in liter or gallon kit quantities. It is available in two formulations, depending on the substrate to be coated.
- Compatible Substrates and Surfaces
- Acrylonitrile Butadiene Styrene (ABS)
- Coated Surfaces
- Plastics
- Poly(Methyl Methacrylate) (PMMA)
- Polycarbonate (PC)
- Polyvinyl Chloride (PVC)
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Coverage | 700 - 1,000 | ft²/gallon |
| Solid Content | approx. 1.5 | % |
| Specific Gravity | 0.9 | — |
| Viscosity (at 25°C) | 1 - 10 | cP |
