Stifel SC
- Chemical Family
- Silanes
Stifel SC is a single component, water based, maximum performance silane sealer for horizontal concrete.
Other characteristics
- Brand
- Stifel
- Features
Cost Effective, Freeze/Thaw Stability, Good Bonding Strength, Good Penetration, High Flash Point, High Performance, Hydrophobic, Low Odor, Low Water Absorption, Service Life Extension, Skid Resistant
- Product Type
1K (1 component) Coating, Sealer, Waterborne Coating; 1K (1 component) Coating; Sealer; Waterborne Coating
- Compatible Substrates & Surfaces
- Concrete
- Odor
- Mild
- Markets
- Building & Construction
- Paints & Coatings
- PACKAGING
Packaged in 5.28 gal (20 L) bag-in-a-box and 55 gal (208 L) drums.
- Advantages
Unique silane chemistry does not evaporate under site application conditions, allowing for deep penetration (up to 1/2 inch) with consistent protection regardless of substrate or application conditions, such as warm or windy weather. Conventional silane sealers contain highly volatile silanes that evaporate during application, requiring a higher solids content to compensate for product lost through evaporation.; The unique silane in STIFEL SC goes into the concrete, not into the atmosphere.; Protects treated surfaces from damage resulting from the absorption of water and chloride ion-containing deicing salts.; Minimizes concrete freeze/thaw related surface scaling.; Protects treated concrete from delamination and spalling resulting from corrosion of imbedded reinforcing steel.; Allows treated surfaces to breathe naturally.; Concrete skid resistance and texture are not altered.; The adhesion bond strength of most sealants and top coats is actually improved with proper application of STIFEL SC.; Substantially extends the serviceable life of concrete structures and signifi cantly reduces maintenance costs.; Safe and easy to use - single component, water based formulation is very low odor and has a high fl ash point (>200º F/100º C).; Can be safely applied to concrete surfaces containing cured polyurethane, polysulfi de or silicone traffi c joint sealants without aff ecting joint sealant performance.; Green Engineered™ – better for health and the environment.; Meets all federal and state VOC requirements and NCHRP 244.
- Technology
- Ready-to-Use Products
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Bulk Density | 992.0 | g/L |
| Freeze Point | 32.0 | ºF |
| Flash Point | min. 212 | ºF |
| Active Solids | 15.0 | % |
| Actual VOC | max. 90 | g/L |
