Stifel GC
Stifel GC is a single component, water based, silane sealer for horizontal and vertical concrete, brick masonry and concrete masonry surfaces.
Other characteristics
- Brand
- Stifel
- Features
Breathable, Cost Effective, Excellent Water Repellency , Freeze/Thaw Stability, Good Penetration, High Flash Point, Hydrophobic, Low Odor, Low Water Absorption, Service Life Extension, Skid Resistant
- Product Type
1K (1 component) Coating, Sealer, Waterborne Coating; 1K (1 component) Coating; Sealer; Waterborne Coating
- Compatible Substrates & Surfaces
- Brick, Concrete, Metal, Steel
- Odor
- Mild
- Color
- Transparent
- Markets
- Building & Construction
- Paints & Coatings
- PACKAGING
Packaged in 5 gal (19 L) pails and 55 gal (208 L) drums.
- Advantages
Unique silane chemistry does not evaporate under site application conditions, allowing for deep penetration (up to 1/2 inch) with consistent protection regardless of substrate or application conditions, such as warm or windy weather. Conventional silane sealers contain highly volatile silanes that evaporate during application, requiring a higher solids content to compensate for product lost through evaporation.; The unique silane in STIFEL GC goes into the concrete, not into the atmosphere.; Protects treated surfaces from damage resulting from the absorption of water and chloride ion-containing deicing salts.; Minimizes concrete freeze/thaw related surface scaling and the corrosion of imbedded reinforcing steel and precast anchors.; Protects treated concrete from delamination and spalling resulting from corrosion of imbedded reinforcing steel.; Allows treated surfaces to breathe naturally. Water entering from the unprotected side or via cracks does not become trapped, minimizing surface sweating.; Concrete skid resistance and texture are not altered.; The adhesion bond strength of most sealants and top coats is actually improved with proper application of STIFEL GC.; Substantially extends the serviceable life of concrete structures and signifi cantly reduces maintenance costs.; Safe and easy to use - single component, water based formulation is very low odor and has a high fl ash point (>200ºF/100ºC).; Can be safely applied to concrete surfaces containing cured polyurethane, polysulfi de or silicone traffi c joint sealants without aff ecting joint sealant performance.; Green Engineered™ – better for health and the environment.; Meets all federal and state VOC requirements.
- Technology
- Ready-to-Use Products
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Bulk Density | 992.0 | g/L |
| Freeze Point | 32.0 | ºF |
| Flash Point | min. 212 | ºF |
| Active Solids | 10.0 | % |
| Vapour Pressure (20ºC) | max. 17.5 | mmHg |
| VOC | max. 25 | g/L |
