BTR8002P

Other characteristics

Brand

Nichigo G-Polymer™

Labeling Claims

Biodegradable

Processing Methods

Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion

Note

¹ Measured with Melt Indexer; ² Measured with DSC, both heating and cooling speeds of 10°C/min; ³ Measured with Micromeritics Gas Pycnometer at 23°C; * The above figures are representative values and are not guaranteed.

Technology

Plastics

Storage Condition

It is recommended to store BTR8002P at as low temperature below 5°C as possible because there is a risk of the MFR rapid increasing and/or decreasing over time in case it is stored at over 5°C. It is also recommended to seal the bag as soon as possible after opening and/or using to prevent moisture absorption of pellet. The moisture absorption of pellet may lead to MFR rapid increasing over time.; BTR8002P is intended for indirect food contact only. Quality assurance and hygiene for cosmetics and pharmaceutical applications are not considered.; BTR8002P would be ignited by heat storage if BTR8002P is kept high temperature for a long time. When storing or disposing of the molded BTR8002P, please kindly cool it to 50°C or less.

Show in full

Material Features

• Compostable
• Tie Resin

Certifications and Compliance

• ABA Compostable
• BPI Compostable
• EU Packaging Directive (94/62/EC)
• OK compost INDUSTRIAL (EN 13432)
• TÜV Approved

Plastics and Elastomers End Uses

• Film
• Multilayer Film

Plastics and Elastomers Functions

Resin

Plastics and Elastomers Processing Methods

• Blown Film Extrusion
• Cast Film Extrusion
• Extrusion
• Film Extrusion