Duratron® PEI U2300
Duratron® U2300 PEI, a flame resistant Polyetherimide that offers exceptional rigidity, strength, dimensional stability, and heat resistance. With 30% glass-reinforcement, Duratron® U2300 PEI is the most durable and high-performance plastic offered in the Duratron® PEI line.Features:30% glass-reinforced for highest rigidity, strength, dimensional stability, and heat resistanceFlame resistantLowest Coefficient of Linear Thermal ExpansionSuperior strength-to-weight ratio and tensile strengthBenefits:Ideal for reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, and structural components that require high strength and rigidity at elevated temperaturesCan withstand harsh conditions and high temperaturesSuitable for a wide range of applicationsApplications:Reusable medical devicesAnalytical instrumentsElectrical insulatorsSemiconductor process componentsStructural components that require high strength and rigidity at elevated temperaturesDuratron® U2300 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions and high temperatures. Whether you are looking to improve the performance of your reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, or need a material that can withstand high temperatures and harsh environments, Duratron® U2300 PEI is the ideal solution. Try it today and experience the difference for yourself!
Properties
- Physical Form
- Plates, Rods
- Plates
- Rods
Other characteristics
- Brand
- Duratron® PBI, PEI, PAI
- Density
- 1,510.0 kg/m³
- Features
Amorphous, Dimensional Stability, Flame Retardant, Food Contact Acceptable, Heat Resistance, High Rigidity, High Strength, High Strength to Weight Ratio, High Tensile Strength, High Tolerance, Low Odor, Low Thermal Expansion
- Polymer Name
- Polyether Imide (PEI)
- Tensile Modulus
- 5,513.6 MPa
- Color (Properties)
- Brown
- Markets
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Fillers Included
- Glass Fiber
Technical data
Table 1 of 4
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 17000 | psi | ASTM D638 (8) |
| Tensile Strain (Elongation) at Break | 3 | % | ASTM D638 (8) |
| Tensile Modulus of Elasticity | 800 | ksi | ASTM D638 (8) |
| Shear Strength | 14000 | psi | ASTM D732 |
| Compressive Strength | 32000 | psi | ASTM D695 (11) |
| Izod Impact (Notched) | 1 | ft.lb./in | ASTM D256 |
| Flexural Strength | 27000 | psi | ASTM D790 (13) |
| Flexural Modulus of Elasticity | 850 | ksi | ASTM D790 |
| Hardness (14) | 114 | Rockwell M | ASTM D785 |
| Hardness (14) | 127 | Rockwell R | ASTM D2240 |
Table 2 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Glass Transition Temperature (DMA, Tan Delta) | 410 | °F | DMA |
| Thermal Conductivity (73°F) | 1.56 | BTU in./(hr. ft² ˚F) | — |
| Coefficient of Linear Thermal Expansion (-40 to 300°F) | 11 | µin./in./°F | ASTM E-831 (TMA) |
| Heat Deflection Temperature (Method A: 1.8 MPa (264 PSI)) | 410 | °F | ASTM D648 |
| Continuous Allowable Service Temperature in Air (20.000 hrs) (3) | 340 | °F | — |
| Flammability (3 mm) (5) | V-0 | — | UL 94 |
Table 3 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Electric Strength | 770 | Volts/mil | ASTM D149 |
| Surface Resistivity | 10000000000000 | Ohm/sq. | ANSI/ESD STM 11.11 |
| Dielectric Constant (1 MHz) | 3.7 | — | ASTM D150 |
| Dissipation Factor (1 MHz) | 0.0015 | — | ASTM D150 |
Table 4 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1.51 | — | ASTM D792 |
| Water Absorption (After 24h Immersion in Water of 73°F) | 0.18 | % | ASTM D570 (17) |
| Water Absorption (At Saturation in Water of 73°F) | 0.9 | % | ASTM D570 (17) |
