DURABIO™ D6350
- Chemical Family
- Polycarbonate (PC)
DURABIO™ D6350 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it also has excellent scratch resistance and UV / weather resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for automotive exterior and interior parts, consumer goods, E&E housing, and cosmetic containers. This grade is characterized by good flow and is suitable for injection mold.
Product families
Applications
- Consumer Goods — Furniture
- Exterior & Body
- Interior
- Medical Devices & Assemblies
- Housings & Enclosures
Product Families
- Polycarbonates
Other characteristics
- Brand
- DURABIO
- Polymer Name
- Polycarbonate (PC)
- Labeling Claims
Bio-based, Bisphenol A-free, Environmentally Friendly; Bio-based; Bisphenol A-free; Environmentally Friendly
- Flexural Modulus
- 2,500.0 MPa
- Processing Methods
- Injection Molding
- Color
- Black
- Custom
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Technology
- Plastics
- Packaging Type
- Bags
- Material Features
- Amorphous
- Ductile
- Durable
- Excellent Transparency Properties
- Good Flow
- Good Mechanical Properties
- Good Scratch Resistance
- Good Weather Stability
- HIGHLIGHTS
High gloss and deep piano black available.; And other premium colors such as white, red, orange, blue, etc. are possible; Excellent mechanical properties; Superb weather-resistance and UV-resistance; Ductility with good impact resistance; Good scratch resistance; Bio-based material
- Storage Information
Do not store outdoors. Keep dry at ambient temperature.; Avoid humid environment, heat and direct sunlight.; The material needs to be pre-dried before processing.
- Packaging Information
DURABIO is typically packed in 25kg paper bags with polyethylene inner liner.
- Applications Information
Drying Condition:; Pre-dry is necessary.; Please dry until moisture content can be less than 500 ppm (less than 0.05%) prior to using. It can be carried out as follows:; More than 7 hours; The maximum recommended temperature must not be exceeded as this may cause aggregation or other defects.; Start-up:; Purge machine completely with DURABIO or other acceptable purging material.; DURABIO is not compatible with conventional polycarbonate, purge machine completely if conventional polycarbonate resin was in the previously in the machine.
- Certifications and Compliance
- USDA Certified Biobased
- Plastics and Elastomers End Uses
- Automotive Exterior Parts
- Automotive Interior Parts
- Electrical Housing
- Electronic Housing
- Medical Device Housings
- Stationary Supplies
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 2200.0 | MPa | ISO527 |
| Tensile Strength | 55.0 | MPa | ISO527 |
| Elongation (at break) | 122.0 | % | ISO527 |
| Flexural Modulus | 2500.0 | MPa | ISO178 |
| Flexural Strength | 105.0 | MPa | ISO178 |
| Charpy Impact Strength (Notched, at 23°C) | 8.0 | kJ/m² | ISO179-1/1eA |
| Charpy Impact Strength (Unnotched, at 23°C) | No Break | kJ/m² | ISO179-1/1eU |
Table 2 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.33 | g/cm³ | ISO1183 |
| Water Absorption (at 23°C, 24hr) | 0.3 | wt% | MCC Method |
| Melt Volume Flow Rate (at 230°C, 2.16kg) | 10.0 | cm³/10min | ISO1133 |
| Melt Mass Flow Rate (at 230°C, 2.16kg) | 12.0 | g/10min | ISO1133 |
| Total Light Transmittance (3mmt) | 92.0 | % | ISO13468 |
Table 3 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.80MPa) | 90.0 | °C | ISO75-1, ISO75-2 |
| Heat Deflection Temperature (at 0.45MPa) | 101.0 | °C | ISO75-1, ISO75-2 |
Table 4 of 4
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Hopper Area Temperature | approx. 50 | °C |
| Barrel Temperature (Rear Hopper side) | 220 - 240 | °C |
| Barrel Temperature (Center) | 220 - 250 | °C |
| Barrel Temperature (Front Nozzle side) | 220 - 250 | °C |
| Nozzle Temperature | 220 - 250 | °C |
| Mold Temperature | 60 - 100 | °C |
| Screw Speed (Refill) | 30 - 60 | rpm |
| Back Pressure (Refill) | 10 - 25 | MPa |
| Decompression (Refill) | 1 - 4 | mm |
| Injection Rate (Injection) | 10 - 60 | cm³/sec |
| Holding Pressure (Injection) | 40 - 100 | MPa |
| Holding Time (Injection) | 3 - 10 | sec |
